chevypickup Posted September 28, 2010 Share Posted September 28, 2010 Hi guys of MCM, how much time I have to wait for polish an enamel painted body?. I´m using TAMIYA polishing compound, these are the best? or I should use another kind of compound for enamel. Thank!!!. Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted September 29, 2010 Share Posted September 29, 2010 Hi guys of MCM, how much time I have to wait for polish an enamel painted body?. I´m using TAMIYA polishing compound, these are the best? or I should use another kind of compound for enamel. Thank!!!. When you can no longer sense the smell of the paint,it is ready to polish out. Tamiya compounds are good,as are many others.How smooth is the paint? If there is heavy orange peel,you may have to wet sand with polishing cloths or fine sandpaper.Is it a Metallic? You should clear coat it before polishing. Quote Link to comment Share on other sites More sharing options...
chevypickup Posted September 30, 2010 Author Share Posted September 30, 2010 Hi Mike, thank for your reply. Yes I have heavy orange peel, and the paint is TESTORS´S Blue metallic 1539, should i use TAMIYA´S TS-13 Clear coat? What happen if I polish a metallic enamel paint with out the clear coat? Another question Mike, I painted de boby like four days ago, can I apply de clear coat now, or I have to wait until the paint is fully dry?. Remember that pain is enamel. Thank again for your advice. Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted September 30, 2010 Share Posted September 30, 2010 Hi Mike, thank for your reply. Yes I have heavy orange peel, and the paint is TESTORS´S Blue metallic 1539, should i use TAMIYA´S TS-13 Clear coat? What happen if I polish a metallic enamel paint with out the clear coat? Another question Mike, I painted de boby like four days ago, can I apply de clear coat now, or I have to wait until the paint is fully dry?. Remember that pain is enamel. Thank again for your advice. You should NOT use Tamiya Lacquer over the testor's enamel.You'll have to clear with Testor's enamel clear,Or they do have an enamel safe clear Lacquer,I checked and this is what you want.It does come in a aerosol.Still I'd test on something other than your model.Light coats here would be advisable. http://www.ehobbies.com/tes1961.html Quote Link to comment Share on other sites More sharing options...
Jantrix Posted September 30, 2010 Share Posted September 30, 2010 I recommend Krylon Crystal Clear acrylic in this case. Acrylic can go over ANY paint and can be polished. It's good stuff. Quote Link to comment Share on other sites More sharing options...
chevypickup Posted September 30, 2010 Author Share Posted September 30, 2010 Thank for the warning. However, can I apply the appropriate clear coat right now (I painted 5 days ago), or I have to wait until the paint is fully dry. Thank Again. Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted September 30, 2010 Share Posted September 30, 2010 Thank for the warning. However, can I apply the appropriate clear coat right now (I painted 5 days ago), or I have to wait until the paint is fully dry. Thank Again. I suggest the "sniff"test.If you can detect an odor of solvent,it has not fully cured and you run a risk of the clear coat drying sooner than the base. This is why so many modelers either avoid enamels in spray cans,or use an airbrush to apply them. They may also have a dehydrator to speed the curing of this paint type. Quote Link to comment Share on other sites More sharing options...
chevypickup Posted September 30, 2010 Author Share Posted September 30, 2010 What happen if the clear coat dry sooner than the base? . I see that you know a lot Mike, what other paint could you suggest me to do my others models? I think the enamel it´s a little complicate and very toxic. Thank again. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted October 1, 2010 Share Posted October 1, 2010 Enamels take a long time to cure in humid areas. Try some Tamiya or Testors one shot lacquers. Quote Link to comment Share on other sites More sharing options...
bang bang Posted October 1, 2010 Share Posted October 1, 2010 Put the body in a conventional oven preheated to 100 degrees & bake for 8 hours .Works like a dehydrator.If you are skeptical put a styrene plastic spoon in the oven.Remember that all ovens are different heat wise so test it.I personally use a dehydrator set @105 degrees for eight hours when shooting enamel paints like Boyd's & Testers. You can buy a dehydrator @ Wal-Mart for forty bucks or less.You can cut the the paint after 24 hours & apply clear @ that time.Hope this helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.