Monty Posted August 29, 2011 Posted August 29, 2011 I've got an old jar of Polly S water-based acrylic paint that I found on a "Discontinued" rack years ago. (Original P/N 500817). Long story short, it has dried out and I'd like to find a way to revive it, since it's not available anymore. 1) What would be the best substance to use to try and revive it? (I have a Badger paint mixer...) 2) Being a water-based acrylic, and assuming we figure out a way to salvage the paint, what can I use to retard the drying time? I used to use this primarily for lettering tires,but I found that it dries too quickly and I can only do parts of a letter per stroke (think Monogram outline letters on their GT Radials). I'm really not looking for a substitute, primarily because I think this paint's slightly off white color looks more realistic than a stark flat white of most flat acrylics. (Look at your own white lettered tires when they haven't been freshly scrubbed for about a month).
Mike Kucaba Posted August 30, 2011 Posted August 30, 2011 (edited) Liquitex,and a few others make a retarder for acrylics,I think it's called Slo-Dri. And there is also something called Flo-out or something like that. Look for it at Hobby Lobby,Michaels,and artsy type stores. I have never tried to bring an acrylic back from the dead. Hope it works. If not try Floquil Reefer White(insert comments here) in their railroad colors line. I've been using it on painted on WW and it takes about a week to dry,but then it's okay.It's very opaque,so it covers black well in usually one stroke. I found the numbers and descriptions for the additives:Liquitex Slo-Dri retarder #6711 Liquitex Flow-Aid flow enhancer#5620 Edited August 30, 2011 by Mike Kucaba
scalenut Posted September 6, 2011 Posted September 6, 2011 (edited) you want plain old "acrylic medium"(craft/hobby stores) ,,, retarders, drying agents, and flow aids are additives Edited September 6, 2011 by scalenut
Mike Kucaba Posted September 6, 2011 Posted September 6, 2011 And... If you'll re-read the original post,you'll see that he was looking for something to retard the drying. This medium is a thinner,no? Then it to would be an additive.Also I'm in Arizona and the temps now are over 100 F. I spray outside in my patio and if I didn't use a retarder,or the other additive, flo- aid,the paint would be drying on the airbrush. I will try the medium that you showed in another post as it is the same brand as some of the other acrylics I have.Maybe it's cheaper than Tamiya's.
MikeMc Posted September 6, 2011 Posted September 6, 2011 If its rock hard, grind it and then use a thinner or carrier....if you take your time it will work. Tip....to prevent this from happening...store the jars lid down, the paint seals the jar for you!!
Mike Kucaba Posted September 6, 2011 Posted September 6, 2011 Even if all this works,there still is a finite amount of paint and you'll eventually run-out.Better to start searching for a replacement now than later. http://www.greatmodels.com/~smartcart/cgi/display.cgi?item_num=FLO404055 http://www.greatmodels.com/~smartcart/cgi/display.cgi?item_num=FLO404064 http://www.greatmodels.com/~smartcart/cgi/display.cgi?item_num=FLO414131 http://www.greatmodels.com/~smartcart/cgi/display.cgi?item_num=FLO414255 Hope this helps.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now