start on a 32 5 window duece

[nobody]

Hi everyone

Well I took some advise of a fellow modeler by showing what I have on the bench and here is one of those projects.

http://public.fotki....-window-32.html

I thought ways to do this kit and what colors will be,But I haven't come to that bridge yet.But I want to do this a simple way,not to much detail and have some fun with it,I had to clean the mock-up first and get rid of all those nasty mold marks that came with the kit.and here is the mock-up.

http://public.fotki....-of-the-32.html

I really didn't use any glue at this time just use some tape to hold the structure together.

http://public.fotki....-of-the-32.html

http://public.fotki....-of-the-32.html

This is all for now I will have to get some part of the interior done of all what I want to be done with besides paint. Still not sure which way i go????

[Dr. Cranky]

Looking very good.

[Nate]

Not to pick any nits, but isn't this a 2-door (tudor) sedan?

[southpier]

no; see there's two windows on each side and then a little one behind. the windshield don't count much. all coupes had 2 doors.

[Nate]

This is the kit he's working on, it's a 2-Door Sedan:

This is a 5 Window: (Snagged from a post by excesivefire)

Technically the 2-door sedan does have 5 windows, though...

[nobody]

Looking very good.

thanks for the comment and the show of your website it may come useful to me later...again thanks Virgil.

[nobody]

This is the kit he's working on, it's a 2-Door Sedan:

This is a 5 Window: (Snagged from a post by excesivefire)

Technically the 2-door sedan does have 5 windows, though...

cool Nate

keep me in formed on your progress,i don,t care if you posted here or not but if you keep me informed in p.m. or just post,I be happy either or

[nobody]

O.k. folks

I been working on the project when I have free time but this is my update on what I am doing to it. first of all the mock-up is very minor.I do want to keep it simple and not get to into aftermarket lots this time around,And have fun with it.But I did found out something. I didn't like about the kit that i had to fix,to me it was a flaw to it and it was the fenders where the front bar goes in place where the fenders have a large gap where the front bar rest as I show in this picture.

http://public.fotki....aiting-how.html

I use styrene to fill up the gap

http://public.fotki....-in-gap-to.html

later I will make new slots for this much tighter than original's were,I also took liberty of separating the shock towers away from the shocks and assembled to the chassis as I feel they are part of the chassis,make it the same color as the chassis as I show

http://public.fotki....ing-shocks.html

I tell you one thing there is lots of mold marks in this kit had to clean all my parts including the fenders

http://public.fotki....ections-in.html but I got them done picture not shown,maybe later I will when I start to paint on the project but I did clean up all the chrome and here this how I am started to do

http://public.fotki....-for-alcad.html

http://public.fotki....or-alcad-2.html

this is where I stand for now,still don't know what colors to paint it .

thanks for looking

[mrm]

I wish I could see it, but I have to be a member.........and I just ............can you upload the pictures, so we can see them without jumping through hoops?