ADRL Pro- Nitrous Cars

[Dragracer]

Here is the Yenko Nova after I first cut it apart

[Dragracer]

[Dragracer]

Here is a pic of the front clip after I opened the wheelwells,made a new grille space & a new front bumper/airdam.

[Dragracer]

Here is the front clip after I closed up the front wheelwells a little & removed the old bumper/airdam.

[Dragracer]

A side view (sorry so blurry) of the new wheelwell opening.

[Dragracer]

A front view of the new bumper/airdam.

[Dragracer]

The engine/parts and the transmission.

[Dragracer]

And the 2nd of my 2 P/N builds, the '64 Mercury Comet. Right now just in primer, the rear wing is taped on for the pic.

[Dragracer]

The front 3/4 view.

[Dragracer]

The engine and parts for the Cmet.

[Dragracer]

The transmission, bellhousing and intake.

[Dragracer]

I had ordered some bolts & such from R.B. Motion awhile back for these 2 builds & as with all the stuff from R.B. Motion it all looks good. The problem was that for certain parts I needed screws, so I checked out Scale Hardware, they now also carry parts from Tuner Model Manufactory, & guess what!, they have screws!, ordered a set of 0.6-1.4 mm common screws & 2 sets of 0.6 mm Philips head screws, ordered them on Tuesday & got them yesterday, now thats quick & they are great!

[Mooneyzs]

Richard... that is awesome with scale hardware. Bob is a great guy to deal with and he has great parts and products. I have a bunch of his stuff as well as some of the Tuner model hardware too.

[Romell R]

Good job Richard cant wait to see where this adventure takes you. and I'll be along for the ride!

[Dragracer]

Thanks Rom, I did a little work on her yesterday, repainted the valve covers & the rear wheels I have in Tamyia Brillant Blue (go with the new paint scheme a little better), carbon fibered the wheels last night (not easy!LOL!,clear carbon fiber decals, I'll do the valve covers today), so far today I just printed up a few pics for the hood,passenger side & drivers side of the car, in different sizes to get the correct size for the car before I print up my decals, the pics are going to tell the story going from the hood-to-passenger side-to-drivers side, now I'm getting ready to start scratch-building the fuel pump,fuel regulators& the fuel/nitrous solonoids. The Nova & Comet are going to be 2 of my Witches Trilogy, the Nova is going to be the "Mind Witch" & the Comet is going to be the "White Witch", still have to decide on a "Black Witch" car. I'll be [posting some more pics soon.