Busteed Posted October 15, 2012 Share Posted October 15, 2012 Assembled 1970 Roadrunner. When I set it on the table, it does not sit flush. The front driver side wheel is off table. Any tips? Quote Link to comment Share on other sites More sharing options...
Fat Brian Posted October 15, 2012 Share Posted October 15, 2012 (edited) It could be a couple of things. Maybe there was some flash on the opposite side that is making it sit higher, or maybe some paint build up is not letting the suspension seat squarely. I would gently take the front suspension assembly off and check all of the mounting surfaces to make sure they are flash free and there is not any excessive paint build up, also check the mounting points on the chassis for the same things. Also, if the tires don't roll make sure that the opposite side tire doesn't have anything like a burr from the tire web on the bottom that would make it taller than the other side. Edited October 15, 2012 by Fat Brian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.