Skydime Posted March 12, 2013 Posted March 12, 2013 (edited) OK, I have a problem that is really starting to bug me. I have two of the Monogram "Car Show" 55 Chevys and one of the Revell "California Wheels" 56 Nomads. Now, I'll be danged if all three of them do not "three wheel" with the front driver side up in the air. Before I get any polite reminders that we all occassionally do stupid things like put the wrong tires or wheels on the wrong corners or something is misaligned, I have checked, double checked, and triple checked these issues. This simply is not the case with these. The cars all just seem to have been warped out of the box. They all came from different stores, at different times. And they have all been stored with the rest of my kit stash...which incidentally has no other kits with a warped chassis and stays between 65 and 75 degrees F. So, I guess my question is, does anyone else have this problem? Or does anyone know of tool issues for these kits? It's really starting to get on my nerves having to warm these up and warp them back into shape. Edited March 12, 2013 by Skydime
chevyfever2009 Posted March 12, 2013 Posted March 12, 2013 No i built a 55 56 nomads and they sit level mine that did that was my catalina
Blown03SVT Posted March 12, 2013 Posted March 12, 2013 Yes, I am working on one now and I had to gently adjust the front by sanding the tops of the front coil springs and lightly bending the control arm. This was with the lowered custom parts in the kit however. I also have a nice body side bow on the passenger side that I didn't realize until it was in paint but should be able to be fixed by gluing the passenger rocker panel to the chassis side on final assembly. I thought maybe I just had a random warped kit seeing as I just searched this topic the other day.
Teds57 Posted March 12, 2013 Posted March 12, 2013 I just bought one and the body is so warped it cant be saved so sent monogram a request for a new body we will see if the new one is better
Tom Geiger Posted March 12, 2013 Posted March 12, 2013 (edited) I think that's just one of the hazards of building that we all need to watch with every kit we build. I just got a piece of glass so that I'd have a true flat surface to build up my chassis onto. Just assume it won't be 100% and make the adjustments needed to make it sit flat. There are many factors that come into if the car actually sits flat. Some of the components have some play in the way they can be installed. I had a heck of a time with the Heller Citroen panel van since the fit was a bit vague. I finally got it where I needed, then drilled holes and installed some lengths of straight pin in areas for strength. It's just good building to check the fit and trueness of every part of your build. And absolutely mandatory when you swap in other components... wheels, tires or axle parts, or scratch buld anything! Edited March 12, 2013 by Tom Geiger
Darbo Posted March 12, 2013 Posted March 12, 2013 I have a 55 i was working on and both sides of the body bow out so far from the side of the chassis glueing it to the chassis wont even work!, it's now back in the box 95% done never to see the light of day again.
CrazyGirl Posted March 12, 2013 Posted March 12, 2013 yikes , and i just ordered a 55 chevy from this maker
Skydime Posted March 13, 2013 Author Posted March 13, 2013 Yes, I am working on one now and I had to gently adjust the front by sanding the tops of the front coil springs and lightly bending the control arm. This was with the lowered custom parts in the kit however. I also have a nice body side bow on the passenger side that I didn't realize until it was in paint but should be able to be fixed by gluing the passenger rocker panel to the chassis side on final assembly. I thought maybe I just had a random warped kit seeing as I just searched this topic the other day. Yep, happens with the lowered suspension every time on mine.
Blown03SVT Posted March 13, 2013 Posted March 13, 2013 Yep, happens with the lowered suspension every time on mine. It sucks... I mocked up 70% of the kit prior to painting. I spent the time to detail the motor with various wiring, vacuum and fuel lines only to learn that the kit had some issues. The motor was a tough fit which required super glue with accelerator, the suspension has been apart a few times to try and dial it in level, the handling of the body has lead to fine scratches and micro marring in the soft black enamel paint, even the 3 pc dash board was a strange fit together as it require the superglue and accelerator as well. I was starting to think most of it was me and that I am a bit rustier than I thought I was (I probably am still). This was supposed to be the easy build after just finishing the AMT '33 Willys which fought every step of the way. Mild rant complete... sorry to vent on your post, just glad I am not the only one.
Skydime Posted March 13, 2013 Author Posted March 13, 2013 (edited) The motor was a tough fit which required super glue with accelerator, the suspension has been apart a few times to try and dial it in level even the 3 pc dash board was a strange fit together... sorry to vent on your post, just glad I am not the only one. Abreviated to save space and directly address...no need to apologize for venting. I'm in the middle of the secend 55 and I've just ran into the motor problem for the first time. Seems the front motor mounts are further apart than the holes on this one, which will result in me drilling them out...or going curbside...depending on how much work I put into the motor. I really believe there is a warp in the mold for the lowered front suspension. And yes, the dash is a strange creature of its own. None of them gave me a real problem. They just all take me a minute to figure out the alignment of the pieces. I am not sure why they didn't just make it a one piece unit with the chrome insert. Edited March 13, 2013 by Skydime
chevyfever2009 Posted March 13, 2013 Posted March 13, 2013 Are you guys building the newer releases or the orginail realeases
Blown03SVT Posted March 13, 2013 Posted March 13, 2013 Brad, mIne is the newer one with the black car with the true fire decals. Ken it wasn't that tough to figure out I just figured it would be a shake and bake kit to relight the fire after a tough build.
chevyfever2009 Posted March 14, 2013 Posted March 14, 2013 Oic mine was a old release hope i dnt have that problem when i build the boyds edition
Skydime Posted March 14, 2013 Author Posted March 14, 2013 (edited) Yeah, mine is the black and flame "Car Show" Edition as well. After some deliberation, I think I finally have figured out the main issue with the suspension. The common complaint here is with the lowered front suspension. Both the 55 BelAir and 56 Nomad use it. Heck, when you slide the 56 Nomad chassis in the 55, it is a perfect fit. When examining closely, one can see that the blob that is an excuse for a spindle mounts to absolutely nothing at top. With nothing to mount to on top, there is nothing to help align it and make up for the flimsy front setup ends that are out of shape. There are upper control arms in the kit but, let's face it, they really don't do much aside from sit there. I think the issues are just a result of a worn out tool. Overall, it is a good kit. And I love the 56 Nomad kit as well. But Eric, you are right. It is definitely not a "shake and bake" kit. Edited March 14, 2013 by Skydime
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now