Looking for photo etched door and trunk locks

[MAGNUM4342]

My hope here is that someone is doing a sheet of keyways for 1/25-1/24th scale cars. Or am I going to have to just pick a detail sheet that happens to have them?

[Ramfins59]

Kevin, I've never seen a PE sheet of just keyholes. Most PE sets from MCG have at least a couple of them on the frets, and, the sheet of chrome pieces in the Galaxie Chevy's has a couple.

[Casey]

How many do you need, Kevin?

[futurattraction]

Kevin,

Have you thought about using a really small-headed straight pin? Those are what I include in my Fairmont body kits. The heads of the ones I use are around .052 OD and have just a touch of crown to them. The shaft on them is ~.020. I could send a few to you if you want.

Scott

[MAGNUM4342]

How many do you need, Kevin?

Sorry for getting back so late gents. Casey I need three right now but ultimately I'll need a total of six.

Kevin,

Have you thought about using a really small-headed straight pin? Those are what I include in my Fairmont body kits. The heads of the ones I use are around .052 OD and have just a touch of crown to them. The shaft on them is ~.020. I could send a few to you if you want.

Scott

Do you have a picture of one in use? I'm intrigued.

[Casey]

Sorry for getting back so late gents. Casey I need three right now but ultimately I'll need a total of six.

PM me your address, please, and I'll mail you the six from the MCG '67 Coronet R/T fret.

[MAGNUM4342]

PM me your address, please, and I'll mail you the six from the MCG '67 Coronet R/T fret.

rtfret.jpg

Incoming p.m.

[Yahshu]

For future reference, Bob @ MCG does make door lock cylinders, MCG-604, there's 9 to a pack. hope this helps.

[MAGNUM4342]

For future reference, Bob @ MCG does make door lock cylinders, MCG-604, there's 9 to a pack. hope this helps.

Thank you Phil.