Revell 1965 Chevy Truck Help

[Ironman63]

I need the chrome side sail molding that says "Custom" for my build. Is there someone in the aftermarket that sells these? I appreciate any help in advance.

http://

[Jantrix]

Doubtful. On a kit this would have been something that would have been molded in if it was done at all. Good luck.

[Erik Smith]

Scratch build...find some sheet styrene that is for siding in N scale (model railroad) and cut to shape. You can print a small "Custom" on clear decal paper. Add a small piece of styrene for the bottom shape.

Edited January 2, 2014 by Erik Smith

[Guest]

Here's the closest you'll come to the piece you're after. http://www.modelcargarage.com/store/pc/viewPrd.asp?idproduct=245&idcategory=12 It's weird that they're on the '60 Chevy fret and not on the '64-'65 fret. Here's one for the '64-'65 http://www.modelcargarage.com/store/pc/viewPrd.asp?idproduct=208&idcategory=12

Edited January 2, 2014 by plowboy

[Fabrux]

If you're feeling really ambitious you could cut the B-pillar from an AMT 1960 C-10 and graft it in; it has the trim you're looking for.

Edited January 2, 2014 by kataranga

[Ironman63]

Thanks for the replies. That's what thought when I couldn't find one online.

I think I'll try the .025 V-groove siding first and see where it goes from there.