Question about painting procedure

[Zophos]

Hey guys,

I'am currently working on a Porsche 356 build and I'm facing some problems with the paint. I've already done 2 coats and I like the color, but there is some orange peel. I'm planning on wet sanding it with 2000 grit. My question is if I should wet sand it and then apply the clear coat because after the wet sanding the sanded areas will have more of a dull look or maybe i should wet sand it then apply another color coat and after that the clear. Another possible solution might be to try and polish them out. I have 3M pastes (2&3) but I'm not sure if this will fix my problem.

[Ace-Garageguy]

See if the answers you seek are in this thread. If not, we'll try to help. (click the link)

http://www.modelcarsmag.com/forums/index.php?showtopic=93118

Edited September 5, 2014 by Ace-Garageguy

[1hobby1]

Check the thread I posted "paint experiment" some great advice on there

[Zophos]

Basically my question is whether polishing with 3m pastes (2 and 3) can make such a paint look normal and not dull. Here is the picture i found: http://i1019.photobucket.com/albums/af320/fastoldcarz/32%20roadster%20gluebomb%20rework/DSCN0158_zps51ce9f9f.jpg