mnwildpunk Posted June 12, 2013 Share Posted June 12, 2013 Ok after applying BMF everyone knows that there just isn't enough contact to always keep it in place. I was wondering if clearcoating bmf areas afterwards would help like it does with decals on keeping them from getting damaged Quote Link to comment Share on other sites More sharing options...
jaydar Posted June 12, 2013 Share Posted June 12, 2013 I don't know about that but i do know BMF makes an adhesive. It is generally intended for using household foils and such but you should be able to apply it under BMF. I have not done so, however. so you need to experiment. joe. Quote Link to comment Share on other sites More sharing options...
Art Anderson Posted June 12, 2013 Share Posted June 12, 2013 I've had great success where adhesion of BMF was a problem by carefully "painting" Micro-Scale metal foil adhesive on the detail in question (particularly with interior detailing where I've used flat finish paints!). Allow the metal foil adhesive to dry (it will be nice and tacky) and simply apply and trim away any excess foil, burnish it down and that's it! Art Quote Link to comment Share on other sites More sharing options...
Blown03SVT Posted June 12, 2013 Share Posted June 12, 2013 (edited) I usually do not have issues with adhesion except maybe corners lifting from handling. I foil before waxing the paint as the wax adds slickness and I have always believed that could lead to adhesion issues. If the corners lift I usually burnish it back down and put a small dab of Future applied with a cotton swab to hold it down. Edited June 12, 2013 by Blown03SVT Quote Link to comment Share on other sites More sharing options...
sjordan2 Posted June 12, 2013 Share Posted June 12, 2013 I usually just paint the details that are too small for BMF to stick to with Testors chrome paint. Especially door and trunk locks for example. They aren't chrome plated anyway. You can clear over foil if you want. Just make sure that you do not use Testors clear enamel. It will yellow and totally ruin your foil. I would follow Eric's advise concerning future. For teeny parts like you describe, I find that the Prismacolor fine-point paint pens in metallic silver are the brightest you can get, though not true chrome. Perfect for dash details, too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.