9 replies to this topic

[BluePopsicle]

Currently working on a '66 Shelby GT350 and plan to put rally stripes on during the build. I've got it primed and sprayed with silver base as of right now. What I'm thinking I should do is shoot the 2nd and final color then clear it. Once dry, tape off and shoot the stripes. Is this the order you more experienced builders would do?

[crazyjim]

What kind of paint?

[bryan_m]

I would shoot the base color, then mask for stipes, shoot that color, and then clear it.......

cheers
bryan

[BluePopsicle]

I'm shooting nail polish.

I would shoot the base color, then mask for stipes, shoot that color, and then clear it.......

cheers
bryan

Wouldn't there be a problem of the mask pulling the base off?

[bryan_m]

as long as you have sanded it correctly that shouldnt be a problem..... i usually use 3M blue stripe tape when i do stuff like that. its low tac, but leaves a nice crisp edge.

bryan

[cobraman]

I do it both ways. ( painting stripes I mean ). Sometimes it depends on the colors. I prefer to normally shoot dark over light colors. As Bryan says the 3M blue tape will give you a nice edge but I will sometimes shoot a clear coat before the second color as it will seal the tape and stop any seepage you may have. I alway remove the tape while the last coat is still a bit tacky. No wrong way as long as it works for you. Good luck and let us see how your car turns out.

[BluePopsicle]

I've actually been trying to post pics all day today, and can't figure it out. I'll have to watch the tutorial again to see if I missed anything.

[BluePopsicle]

Here are (hopefully) some photos of what I'm working on. Since taking these pics, I've sprayed the blue and applied 2 coats of clear. Pics soon to come.

[BluePopsicle]

[BluePopsicle]

I feel this topic has moved beyond the original post. I'm going to move this to a more appropriate thread.