crazyrichard Posted February 10, 2014 Posted February 10, 2014 (edited) going for the mercury first like real car from me all i build where hot rods fenderless stuff ... so this will be something different for me haha Edited February 28, 2014 by crazyrichard
crazyrichard Posted February 10, 2014 Author Posted February 10, 2014 started simple by cleaning the side moldings after some filing > smooth removed the pillar in the side window and also the 2 pillars in the back window i wanted to keep the roof original but its itching to chop it .. i wan to look at some mercs tomorrow and then decide
Joker Posted February 10, 2014 Posted February 10, 2014 Got you a link on how to chop a Merc.. Link...http://www.cjhilton.com/models/chop.htm Merc pics link... link...http://www.flickriver.com/search/1949+Mercury/
crazyrichard Posted February 11, 2014 Author Posted February 11, 2014 thnx joker i will take a look at those !!!!!!!!!
crazyrichard Posted February 11, 2014 Author Posted February 11, 2014 started on the stance , made metal pins in the steering rod , what amt made up wasnt really working lowering was easy since amt provided a stock and lowered version loose on the table with the fender skirts then started some cleaning , the rain gutter had to go gone , redid the doors panellines , still rough work need to be finetuned later headlights , there where to options like a stock one and a custom one where the glass was sitting deeper in the housing .. i was playuing around and sanded a bit on the originals and glued them in from behind instead of through the front and man that was the look i wanted deep and the lines where just perfect when i put it on the wheels i saw the tyres where to much on the outside like to close to the well , so i am changing the wheel backs and make the rack more narrow the stance was pretty spot on like they look in real life hanging back a bit , (rake) but i never likes that .. so i used smaller diameter tyres to get the front lower and get the wheels turning all the way in and out
crazyrichard Posted February 11, 2014 Author Posted February 11, 2014 thnx jason and yes i have been wanting to build this one for a while .. found the absolute perfect wheel tyre combi !!! i looked at a lot of pictures of merc's and in general i really loved the wheels on the black one below also the fender skirt in the gap .. going to to that instead of on top i also love when the wheels are in more , like a more narrow track now back to the wheels on the black one ... now i just should find these hub caps in my partsbox (yeeejjj) almost identical , i will make the center flat and add some bullet type centers in these , together with the white walls i just love these
CaptainAhab Posted February 11, 2014 Posted February 11, 2014 Loving the process. Keep it goin. Glad you went with the AMT kit as I have a Revell one, while pretty cool w/ sweet option parts, I just don't dig the chop they did with it as well as a few other things.
crazyrichard Posted February 11, 2014 Author Posted February 11, 2014 well people are saying chop the roof chop the roof but so far i still dig the stock roof hight ....maybe .. not sure yet made the kit mount backs for the wheels a lot more narrow and made it so they fit in the tyre with the rim / hub cap so now its low and the wheels are more in the well this is how it sits on the front wheels , all mounted and this is why i did the more narrow track now it looks realistic when it steers in or out clearance wise it will look more exiting with the bullets in the center sticking out a bit and that hood needed to be cleaned so i sanded the merc name and logo of and the center molding , while keeping a look out for the wedge line in the middle so all the lines where preserved the front window opening was ... hmmz after removing the center pilalr so i sanded that so the shape was nice and smooth al aroumd and this seems small but i removed the ugly molded windshield wipers man i had to remove a ton of material to get that whole strip smooth , in the end i even filed and sanded a new shape in it and using a round file made a transition from the falt part to the pillars ..
Jordan 191 Posted February 12, 2014 Posted February 12, 2014 I've built this kit once. It's fun to see it done RIGHT! Very nice.
slusher Posted February 12, 2014 Posted February 12, 2014 Love how you have cleaned up the body. Looks great...
CaptainAhab Posted February 12, 2014 Posted February 12, 2014 does this version come with the custom grill bar with the bullets on the ends that you receive in the new 3 in 1 trophy series kit?
crazyrichard Posted February 12, 2014 Author Posted February 12, 2014 thnx guys and joe well i think so i must admit i hace robbed some parts out of the kit in the past and used 2 bullets so yes it must be ..the box says 1991 (year)
crazyrichard Posted February 12, 2014 Author Posted February 12, 2014 cut the fenderskirts so they fall in the wheel well // this is just after glue-ing them in on the bottom i need to sand them in shape so they flow into the bodyline sitting on al 4 wheels , this is the ride hight , i really tryed to go nice and low but still keep it realistic , everything runs free ..also glued in some styrene on the corner of the hood the seem was to wide there better shot of the ride hight
crazyrichard Posted February 12, 2014 Author Posted February 12, 2014 thnx mike ! well first i put in the rear splash pan , needed a lot of reshaping to fit then the trunk was next and mannnn.... amt figured you need to put the hinge on and on final assembly put the hinge inbetween te body and interiour tub ,, i could already see that would never work .. the sact where the hinges go was horrible to i cut the part that closes in the hinge of the interiourtub and sanded it and put the trunk on with tape and glued in the part thats holds the hinge now the thing is when the trunk is on and follows the round lines of the rear side wings there way a massive hight difefrence between the trunk and the part inbetween the trunk and rear window ..... the easyest solution for me was to make sure the trunk sat right on the round shapes and deal with the hight difefrence later , the material was uber thick so removing stuff was an option after the glue dryed the hinge was in placxe and luckely the trunk stayed in place , cant move around and opens perfect closed up you see the edge i drawn along it with a fineliner after a whole whole lot of filing , sanding i got it flush now also removed the edge along the rear window , the molding .. to match the rest of the smoothness ... from the rear windows to the trunk a also reshaped the line , there was a molding and i smoothened that out .. most work went into all the round shapes around the trunk and rear pillars.. also the transition from the trunk onto the rear window was a lot of work since i needed to make sure it flowed in a angle and i kept all the roundness a bit of bondo where i nicked the trunk with my file and i cleaned teh gas cap .. after i clean this up i can start custom taillights , frecnhed in the body
crazyrichard Posted February 12, 2014 Author Posted February 12, 2014 dryfit sitting on the wheels i could make a louvred hood .. not sure yet because thats what the other kits have and i want this to be kind of difefrent from the main style glued on the front lower pan , it should sit on the chassis but i want everything nice and tight so i changed that ... almost looks like primer already got the body pretty smooth this is why the left side shape is off so that needs reshaping bummer i love the chrome bumper at the front but on the rear i didnt really like it .. maybe i change some stuff on the rear so the bumper sits different
Baugher Garage Posted February 12, 2014 Posted February 12, 2014 This is looking so good! I built this kit stock not long ago and know what you mean about that trunk. What a joke!
crazyrichard Posted February 12, 2014 Author Posted February 12, 2014 thnx mike and yes it was like whow .. i still need to fill the corners of the hood also big gaps there first removed the splash pan and fitted the one that already has mountings for the rear bumper this also sets it back more .. the idea of the closed splash pan was to let the bumper hug the car more but in the end that looks bad now the corners of the hood need work you can see the gaps
crazyrichard Posted February 12, 2014 Author Posted February 12, 2014 did the corners of the hood and made them longer , need to finsand the shape but the gaps are gone other side , this was easyer here i could heat the styrene and pull it out a tad and sand it again started on the taillights drilled holes i only had the kit tails , those dual caddilac style things that are one piece without a clear lense , nonono so i found 2 small great shaped lenses and made it so they fit tight in the holes , almost one with the body only sticking out a tiny bit on the back i glued round buckets that act as spacer and after paint i can use that to glue the lenses look at the pics below , my vision is like the proportions of the body and roof are great .. like if i would chop the roof the sides would be long .. i know i can dut the sides but naahh.. so my feeling was i actually like the stock roof hight
Baugher Garage Posted February 12, 2014 Posted February 12, 2014 Man, if that was gunmetal gray with the big grill, it'd look about like the Merc in Stallone's movie, Cobra.
CaptainAhab Posted February 12, 2014 Posted February 12, 2014 (edited) It does look pretty good without a chop, and if you use spotlights it will certainly make the roof look even lower. Nice work so far, diggin the taillights and wheel treatment Edited February 12, 2014 by CaptainAhab
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now