ROY FERGUSON

Renwal military wrecker converted for civilian use. I replaced the 2piece plastic tires with resin cast from Mini Arms.

I think this was older kit as the kit had the floatation tites.

I am working on AMT Autocar dump with floatation front tires. I have 2 more of this kit but neither one has the floatation tires Is the one with the floatation an early or later model?

MAXWELL48096 You are correct edited title.

The top lights, siren and decals came with the kit.

I was given this Polar Lights ECTO 1 model as it was glue bomb. The first owner had painted it with a brush and tried to tint the windows. I striped the paint off the body but the windows were ruined so I painted them black. There were 8 holes in the roof I filled in. Purchased the decals on Ebay, not quite what I wanted but they worked.

British North African WW 2 Jeep. The included figures seem to be to large for the Jeep, out of scale ?

I went to a local gun show last weekend and found this. Shrink wrap gone all parts in bags.

I removed the sleeper and fabricated a new rear of the cab fabricated extended front bumper, extended air breather and built deck and \added winch

Thanks for the input Will move winch close to cab

Please look at the photo and advise which version of the tractor look better, the winch close to the cab with barrels towards the rear or winch towards the rear and barrels towards the cab. I cut sleeper off and made deck plate for winch. Nothing glued down.

!/35 scale Italeri WW 2 vintage Jeep

Thank you for the link.

I ended up with a Hummer 998 kit minus instruction sheet. If someone has a sheet that can scan the sheet or direct me to web site that I can down load Thanks roy

Is there any more info on release date ?

I did use SMOKE on the windshield .The light color is Rustoleum Winter Haze the fenders are Krylon Ocean Blue. Do any of you think the tires are a bit small ?

AMT 1950 Chevrolet pickup. Nice kit no flash or warpage. The windshield was basically the same size as the opening. Trying to put the windshield in it slipped and got glue on it. I fogged the windshield with smoke trying to make it look tinted ,did not work. I will get another one and figure out the windshield.

This is a diecast Ford produced by SpecCast as a bank and also sold as a model kit. The tires are from AMT Ford pickup kit.

I shortened the frame of the Ford. I modified the auger utility body by adding a shortened fuel tank on the left side, crafted a rack and filled it with tools, installed a light on the boom and added decals to cab and boom, put safety stripping around the bottom of the bed, made controls for boom from straight pins and added black wire to drum on the deck of the body.

I bought the camper shell from Ebay seller, made for 8 foot box. I shortened shell to fit the Honcho box.

Built pretty much from stock kit, topper from Ebay.

I built this Revel Bronco basically stock with the exception of Olson Brothers front bumper with winch and rear bumper.

Built straight out of the box. Simple model no warpage. The last copyright date on the box.