The Phenom

this is the car that im gonna replicate .,the chassis number is 0714tr. here the link! http://www.autoblog.com/2009/02/06/rare-fe...aranello/print/

ohh and these two clear buttons on the chassis are for give a little support to the suspension arms.

hey guys here a little update for the formula 1 .,this time i work a little on the chassis .this chassis have a center part of wood "Jabroc wood " i replicated this wood with my airbrush .,first i masked the chassis after dried and painted the center with a little mix of white and brown to replicate the color of the wood then i traced a few lines with a red brown color to replicate the fibers of the wood ,i trace the lines with my airbrush and a little piece if styrene to draw the lines ,then i detailed the head bolts with the scalemotorsports detail parts.the jabroc wood was introduced in 1994 due to a new regulations on the cars to get the height of cars at a maximum clearance from the road due to the constant fireworks when the titanium braces touch the road .the jabroc wood has a 10mm of height,every car has a clearance of 1mm to down the height ,at the end of the race the car was inspected to see if the car ran below the 1 mm of height ,if the wood measurement was in less of 9mm of height the car was disqualified. i hope you enjoy

hi guys here a little update! .,well i worked on the front windshield frame.the kit comes with a "molded in" frame on winshield but looks tricky so i filled the resesed area on the body with a molded stripe of styrene and glued with thick glue "CA" and sanded to smooth the area,then i aligned the PE part from studio 27 and drilled every hole on the PE frame to add this rivets to replicate the real ones .around 6 hours to complete,its a little difficult part to make but with patience and a little time will look great! thanks!

HI BOYS,HERE A LITTLE UPDATE .TODAY I TAKE TIME TO TEST FIT THE ENGINE PARTS TO SEE WHERE IT NEEDS WORK SINCE THIS IS A RESIN ENGINE IT NEEDS A LITTLE CLEAN UP AND PARTS FIT FIX ,THE SIX CARB BASES AND CARBS NEED A LITTLE CLEANING AND SMOOTHING TO FIT CORRECTLY,I TAKE TIME MEASURING AND TESTING THE HOOD AND CARBS FUNNELS TO SEE IF THE FUNNELS TOUCH THE HOOD.THESE ARE VERY IMPORTANT TESTINGS TO GIVE A VERY SHARP AND CLEAN ASSEMBLY ,THE BLOCK HAS A LITTLE FLASH OVER THE FRONT TIMING COVER AND OTHER AREAS LIKE THE CENTER OF THE BELLHOUSING ,SO I CLEANED CAREFULLY WITH AN EXACTO BLADE AND THEN SANDED THE PART WITH A 600 GRIT,AS YOU CAN SEE THE ENGINE ITS ALMOST READY TO TEST THE EXHAUST MANIFOLDS AND PIPES .I OPENED THE FRONT AIR SCOOP TO ADD A CURVED GRILL FROM STUDIO27.,ITS A LITTLE DIFFICULT TO FIT IT TO THE CURVED OPENING BUT WITH A LITTLE PATIENCE WILL WORK i hope you enjoy boys .,until next weekend!!

HI BOYS! HERE ANOTHER PROYECT THAT I STARTED A FEW DAYS IN MY WORK.I STARTED WITH THE ENGINE PLANT,THE HEADERS WERE PAINTED IN GLOSS BLACK LAQUER THEN PAINTED WITH SPAX TIX CHROME TO GIVE THAT METAL LOOK AND FINISHED WITH SMOKE CLEAR TO RECREATE THE HEAT AND STRESS IN THE PIPES,THE ENGINE WAS PAINTED IN MICA SILVER AND SEMIGLOSS BLACK REAR TAIL AND THE SPARK PLUG MAGNETOS WERE PAINTED WITH BRIGHT RED,THE EMBLEM IS A METAL TRANSFER THAT I TAKE BORROWED FROM ANOTHER FERRARI ,THE FRONT BODY PART WAS JOINED WITH A FEW PANELS THAT COMES IN HALVES AND WERE FIX IT TO THE BODY WITHOUT ANY SIGNS OF MOLD LINES AND FLASHES.I USE (CA GLUE )TO MAKE THIS JOINTS,I HOPE YOU ENJOY ! STAY TUNE ;)

hi boys! tommorow i give you a few updates of the 250tr,i work on a ferrari f1 2001 right now to post it this evening so stay tune!!

Que raro ...azul...no es un color que usas mucho... :lol: Weird ...blue? you dont use a blue color frequently !! :lol: just kidding blue its a good looking color

dont worry boys !! i just kidding too!!! :lol: :lol: :lol: but thank you for your opinions you are welcome

you are right dave it will look like a banana i hope this post will not be seen by the monkey's the 250 tr that i decide to build its yellow with black nose this is number 21 of the 1958 le-mans race ,i have other examples like the blue you mention but im not decided yet.

i don't think so :lol:

don't worry cotto ! the yellow looks very interesting on this one! thanks for your comments!!

thanks jhdrew in my case im not decided what car build i mean with numbers or simply stock ,i bought a set of decals from studio27 to make the number 21 but i dont know

i think i have a few pics of the black car,i send to you a few pics this week!

i just kidding :lol: simon., ismael its a great modeler!! sorry ismael!! i can't wait to see the ismael's 250 finished

i asure you! good luck with your250! saludos

vaya simoncito good work on this one saludos!

:blink: :blink:

thanks theres a lot of work on it(ferrari) ,the model comes with a few minor issues but its not a problem.i spend a few bucks on this one and im gonna make a good work on it. thanks for watching

looks good mike! good detail ., i like the color that you choose for the body, what color is ?

here are the pics thanks for your interest! this model was builded a few years ago i think three years it has a PE set from tamiya and a scratchbuilded roll bar,its finished in mica silver base and clear coat

of course let me see in my memory card just a second!

well i was check the fit of the engine,as you can see there has a little fit problems .so i started modifing just a little the engine mounts.,the mount ill be relocated just a little backward to set it just right on the center of each engine bases and of course the lenght of the engine was check it too.there no problems with the lenght ,it sits just right compared with the kit engine.

HI EVERYONE ,HERE IS MY NEW PROYECT FOR 2009,HASEGAWA FERRARI 250 TR .I HAVE THIS KIT FOR AROUND 6 OR 7 MONTHS IN MY WORKBENCH TO BUILD IT AND NOW ITS THE MOMENT .THE KIT HAS A VERY FINE MOLDING FOLLOWED BY A WELL DETAILED INTERIOR AND CHASSIS.THE ENGINE IS GOOD BUT NOT COMPLETE SO I DECIDED TO REPLACE IT BY ONE WITH MORE ACCURACY AND BETTER LEVEL OF DETAIL .I BOUGHT A BRAND NEW ENGINE FROM HISTORIC RACING MINIATURES ,THE ENGINE COMES WITH EVERYTHING,IT COST AROUND 45 BUCKS .THE WHEELS ARE FROM KA MODELS AND THREE DETAIL SETS WERE ADDED.,ONE FROM KA MODELS,STUDIO 27 AND RENNAISANCE,I ALREADY ASSEMBLED THE WHEELS AND TIRES AND IM WORKING IN THE ENGINE COMPARTMENT TO FIT THE NEW ENGINE SINCE THE ENGINE HAS A LITTLE DIFFERENCE IN ALLIGMENT WITH THE ENGINE MOUNTS ,IT WILLL BE RELOCATED TO SOLVE THE PROBLEM.I HOPE YOU ENJOY THIS BUILD ,VERY SOON I POST MORE FROM THIS GREAT KIT,THANKS!!! <img src="http://www.modelcarsmag.com/forums/public/style_emoticons/<#EMO_DIR#>/wink.gif" style="vertical-align:middle" emoid="" border="0" alt="wink.gif" /> <img src="http://i230.photobucket.com/albums/ee94/Rey365Ferrari/SANY0363.jpg" border="0" class="linked-image" /> <img src="http://i230.photobucket.com/albums/ee94/Rey365Ferrari/SANY0199.jpg" border="0" class="linked-image" /> <img src="http://i230.photobucket.com/albums/ee94/Rey365Ferrari/SANY0367.jpg" border="0" class="linked-image" /> <img src="http://i230.photobucket.com/albums/ee94/Rey365Ferrari/SANY0365.jpg" border="0" class="linked-image" /> <img src="http://i230.photobucket.com/albums/ee94/Rey365Ferrari/SANY0366.jpg" border="0" class="linked-image" />

HI linetex ! great job on this one very well done detail job and paint!