krishna.iskandana

I still have a Tony Nancy's Revell-Liner left on my stash, I might try to plumb the fuel system as you suggested on that project. Thanks again

Thanks for the correction, mate. Thank you all for your kind appreciations. Regards

Thank you for your appreciations guys. Best Regards

Hi again, Here's an old but recently completed kit from Revell, Joe Amato's Valvoline Top Fuel Dragster which won the 1990 NHRA Top Fuel Series Championship. I added the engine wires and light weathered the exhaust pipes. The color is tamiya blue and pure white. Let me know what you think and thanks for looking. Best Regards Krishna Iskandana Jakarta, Indonesia Perth, Western Australia

Hello again guys, This is actually a rebuild project, a Mitsubishi Lancer Evo 8 from Fujimi. The color is bright red from tamiya and clearcoat from Mr. Hobby. Let me know what you think and thanks for looking. Best Regards Krishna Iskandana

Thanks for your kind comments guys. Best Regards

Thanks for your appreciations, guys Best Regards

Thanks mate, in regards to the PE parts, Aoshima said in their facebook page that they didnt produce PE Parts specifically for this kit. However, they also said that some of the PE Parts for the Murcielago SV which they released earlier are applicable to this kit, but they are sold separately as usual. Regards

Hi again guys This is actually my second tumbler from moebius models, the first one was black and I decided to go further with the second one and built the camo version. It was really a masking tape predator because I had to mask it part by part. The color is the combination of tamiya linoluem deck brown over tamiya light sand. Let me know what you think and thanks for looking. Best Regards Krishna Iskandana Jakarta, Indonesia Perth, Western Australia

Hello again guys, It's been quite a while since my last post. Here's a recently completed model which was newly released by Aoshima, a Lamborghini Murcielago R-SV GT from Reiter Engineering. It was spraypainted with tamiya gloss alumunium and semi gloss black and then clearcoated with Mr Hobby Gloss Clear. The door fitment was way better than the murcielago sv. Let me know what you think and thanks for looking. Best Regards Krishna Iskandana Jakarta, Indonesia Perth, Western Australia

Hello again guys, Jeep Wrangler Rubicon from Revell, spraypainted with tamiya park green and the clearcoated with mr hobby gloss clear. Let me know what you think and thanks for looking. Best Regards Krishna Iskandana Jakarta, Indonesia Perth, Western Australia

Thanks for your kind appreciations guys. Best Regards

Hello again guys, This is a 2009 Dodge Challenger SRT/8 from Revell, it was finished around the same time as the Hemi Cuda I posted last week. The color is also candy lime green and semi gloss black (both are from tamiya). The wheels were changed to a set of 19" Racing Hart CR from Aoshima. Let me know what you think and thanks for looking. Best Regards Krishna Iskandana Jakarta, Indonesia Perth, Western Australia

Thank you for your comments and critics guys, I will make sure that no more out of scale ignition wires on my future builds Warm Regards

Hello guys, This time I will post a Hemi Cuda from Revell. I've been wanting to have this kit for quite long and there was a time when it was rare and expensive anywhere online. Luckily Revell decided to Re-issue this kit and the price decreased to be a reasonable price to purchase. The color is Tamiya candy lime green combined with tamiya semi gloss black, and then clearcoated with gloss clear from Mr Hobby. I changed the wheel set to a set of Gram Lights G57 from Aoshima, lowered the ride heights and wired the engine. Let me know what you think and thanks for looking Best Regards Krishna Iskandana Jakarta, Indonesia Perth, Western Australia

In my opinion, Aoshima has been rapidly progressing in terms of new models they issue each year and the quality of their kits. Their quality easily eclipses the quality of fujimi kits in a way that if I was to choose, for example, the same newly released lamborghini cars from fujimi and aoshima, the fujimi kit would cost me let say 40 dolllars while the aoshima kit 60-70 dollars, I would still have chosen the aoshima kit with zero consideration. I consider tamiya still has the best quality, but they are quite conservative in terms of releasing new 1/24 car kits. Meanwhile, aoshima has progressed and excelled in terms of new releases and quality far beyond expectation. Oh, and their facebook page has been very helpful to improve their customers interface. In the instruction, the color codes refer to GS Creos so that would be the same to Mr Color. Thanks for your kind comments guys Best Regards

Yes, I used the PE parts from aoshima as well, but they are available separately. From my point of view the PE parts fairly helped to detail-up the box stock kit because i didnt use all of them, only for parts which are visible from the outside such as mesh, emblems, etc

Thanks mate, Really sorry that I didnt put this up on the workbench, I have never taken WIP photos, at least until now.

Hi again guys, Here's another recently completed model, Lamborghini Murcielago LP 670-4 SV from Aoshima. Superb kit as usual, but somehow I just couldn't fit the doors properly, must have been my mistake as a modeller. The color is tamiya TS 16 yellow with gloss clearcoat from Mr. Hobby. The original wheels were too small for my taste, so I decided to change them with 19" Work Gnosis GS2, also from Aoshima, but I chose to keep the original tyres. Let me know what you think and thanks for looking. Best Regards Krishna Iskandana Jakarta, Indonesia Perth, Western Australia

I didnt encounter any fitment issues at all when I was building this one. Thanks for your kind appreciations guys. Best Regards Krishna

Thank you for the appreciations guys Best Regards

Hello again guys, Here's another utility vehicle, a GMC wrecker tow truck,also from revell,and it was completed around the time the snow plow truck completed. The color is tamiya TS-15 blue and mr hobby gloss clear as a clearcoat. Let me know what you think and thanks for looking. Best Regards Krishna Iskandana Jakarta, Indonesia Perth, WA

Hello Guys, This is a GMC Pick Up Truck with Snow Plow from Revell. It was built oob, spraypainted with tamiya brilliant orange and clearcoated with gloss clear. Let me know what you think and thanks for looking. Best Regards Krishna Iskandana Jakarta, Indonesia Perth, Western Australia

No problem at all mate, thanks for the appreciations Regards

Thanks for the comments guys Regards