Jump to content
Model Cars Magazine Forum

B.Beachum

Members
  • Posts

    90
  • Joined

  • Last visited

Everything posted by B.Beachum

  1. Off on me I guess in a Good way Barry Beachum
  2. With me ,...I'm doing 1/16-1/12 right now, should post some pics. Thanks for the pics Barry Beachum
  3. it is going take 2 different size hinges,...I have some Bamboo Squewers from the dollar store and taped 2 inside the body from fender to fender too help take stress off the rocker and help keep the opening straight ,...and I will tighten up the opening,..I was waitng for a Tamiya Scribing tool to see how it works but I just used the backside of a blade and I'm just going to have to deal with the opening cause the blade width and not being to hold it perfect in every pass,..and it's funny how fitting the door can get out of hand in a hurry if you don't remember to work with just 2 of the 4 sides of the opening,I'm with you on working the front of the door edge(hinged end ) and hopefully the openend will follow, Jeff Thanks for the Heads Up on what not to do ,but that is a nice car anyway...if you get tired of looking at those doors I could find room for it ,...I'll be back after I done some more Homework, Thanks, Barry Beachum
  4. I see it's camera,.. got 1 # on 2 pics in 2 different folders
  5. It takes about 1/2 hr per door,..the tape on the door is so I can be lazy and drag the knife across the tape and it falls in the DA GROOVE,..I think the index card will work but we will make it a LOOSE card,..when I was scribing the roof line of the door I held the knfe at a compound 45 so the roof is at a 45 when it's cut through, I think it might help in the dressing of the opening and the tops of the doors will have a 45 are better,I taped the tub and frame in the body for xtra support,...I think it will be fun building this opening,...I could be wrong,...I'm a rookie at this,...I got side tracked by a 1/12 Power Tour Camaro build ,..I had to stop everything so I could try to get a LOOK while it was in my head. Thanks, Barry Beachum
  6. World to do that race on certain laps,....High Speed Demolision Derby But that's 1 thing that keeps it Interesting,.....I love Motorsports Barry Beachum
  7. I will tape over the area around the door ,I wanted to try 1 of those scribing tool if it was thin enough,..I'm collecting pics of door openings,going over what you did and this car I will try you Future floor wax trick because its RED and because after the doors I will have to put it in the BULLPIN and it will have plenty of time to cure after being primered Thanks once again for your help BarryBeachum
  8. I find this kida funny but it works the wells and wheel openings are there
  9. Week or less,...I've been looking at your build step by step and studying since you started, I'm hoping the same will work here there is no real weight issue,It's just larger and easier to see and making more eye appealing ,I'm trying to use just 1 body,.. test myself,..sucker for pressure,.. Barry Beachum I guess I could be aka The Plastic Punisher
  10. How about cutting the doors on this 1/12 Vette?..I will not build it right away but if you care to show and or tell me I could do it to show a different scale to your veiwers,I realize how far the door runs into the roof and the contours of the frt of the rear fender,..but I thought it might be fun for variaty,...the 57 is coming along Barry Beachum
  11. I'm like everybody else ,....no words to describe it. Barry Beachum
  12. but those tires are cool too. Barry Beachum
  13. That likes your flames ,...I have a project for you too. Barry Beachum
  14. I'm just starting back at building but you guys make it easier,Thanks Steve H and Bill G for the help,..I have 1 more 1/12 57 I think I will try the 57 Black Widow,..and I have some parts left over for a another bike,..I think I like the BIG model builds,...and then I have a 1/12 Camero ,I have big plans for, but I better get a few more builds under my belt. Appreciate all the help Guys Barry Beachum
  15. I'm just starting back at building but you guys make it easier,Thanks Steve H and Bill G for the help,..I have 1 more 1/12 57 I think I will try the 57 Black Widow,..and I have some parts left over for a another bike,..I think I like the BIG model builds,...and then I have a 1/12 Camero ,I have big plans for, but I better get a few more builds under my belt. Appreciate all the help Guys Barry Beachum
  16. Pretty Good check it out,
  17. It's starting to look good Mark...
  18. my 57 chevy, it's back apart right now for paint ,...cars next Barry Beachum
  19. I 've stripped the chrome(used your trick Bill with Windex) ,body has primer but might need a light 1 some small stuff around the headlights Ive been working on but the chrome fits good ,I can just scratch away some primer in the recessed area where the chrome goes for gluing? ,the top of 1 the rear fin chrome is bowed alittle,..and the points that are at the very end of the front fenders does not follow the fender it points straight and the fender actually rolls inward towards the grill ,I will work through it, got this far whith your help, Thanks, Barry Beachum
  20. 1 was a 66 Super Sport with a 283 w/auto and the other was a 67 with a 6 250 w/auto,...both were Marina Blue and the 67 had a white top,I saw the 1/64 Hot Wheels the other day and made me think back,.. Thanks for the pics, Barry Beachum
  21. That can give me some ideas on the Chrome attachment on a 1/12 57, the Chrome is alittle distorted ,couple pieces bowed up at the ends, Is it best to drill holes in the chrome and put pins in them and drill holes in the body for them to go through and then bend down the ends and glue inside the body?...is there a better way? Any help from anybody is Appreciated, Thanks, Barry Beachum
  22. I lean towards the Billet rims,...do you have a painting service ?say if some one was to do the prep and send you the item for a couple weeks while you work your magic...and $ is right,....I like your flame style,..I like them when they cross each other,..Ghost flames are nice too ,do you do those ?,... Excellent job. Barry Beachum
  23. I'm building this to go with the '57,..it's a couple 1/12 kits 1 being white metal,...I was missing the Waterpump to the 57 and the Cylinder head was Warped ,hahaha,...destorted,..and making the intake the wife got mad,...found a 1/12 57 chevy on ebay and ripped it from some poor sole in the last 10 seconds,..so now I have spare parts????....how about a 1957 Chevy HeadLight for the bike????
×
×
  • Create New...