B.Beachum

I like these cars with the 934 rear on the street,...my own preference, I thinking about drilling for lug stud holes for a street car ,I think it might be more true,..the kit gives some brake line brackets I would like to run the lines,... since I'm short on cluster panels for the top of the Fuel Cell I found some sheet metal,...I'm liking the Idea on a Carbon Fiber hoods ,I have some Bronze Carbon Fiber for the Orange car and Small weave black for a Black car,...alot of what goes into building and using the kit gets covered like always,..ya love doin all the detail and then it seems like with in the next 5 steps your covering it up Thanks, Barry Beachum

German Street Outlaws first spreading 1 kit between 2-3 cars and 1 Whole kit on 1 Racecar,...I worked on these cars in 86-88 doing bodywork on install Slantnose kits and Whaletail kits, I 'm going to build 1 like I use to build and then the other 2 close to box stock,.. Thanks, Barry Beachum

I didn't want the brass look so I used Dupicolor GM Buckskin on the center pieces and the retainer ring I painted an aluminum with prisim clear I drilled the dimples out in the retainer ring and made the holes in centers larger for some pins This is mostly stuff mocked up for the 1st time but I think I'll keep the shocks as is ,...kinda like them,..The rotors will be changed alittle,.. I have 4 1/12 934 kits and 1 Martini kit and 2 SMS detail kits i'll see what else I can come up with,...

These kits are massive

I'm glad to see others are doin these kits with SMS the kit

NOW DAVE SHOE ,HAS STRAIGHTEN IT OUT Barry Beachum

I know what I have ,..Looks like you still tryin to figure it out I have not seen your post on the FE forum yet Barry Beachum 428 did not share the same stroke as a 427 428= 3.98 stroke x4.13 bore 427 =3.78 stroke x4.23 bore,....go back and check yourself again

Thanks for the spark plug placement lesson ,..do you know what 1 looks like? Barry Beachum

427 CAMMER or other Cool parts go to Alterstates.com and see Chuck, Super nice guy to deal with...He is getting out of the Business ,says has been in it too long,... another good 1 callin it quits ...And They make for EXCELLENT CONVERSATION PIECES as you can see :wink: , Barry Beachum

Everybody notice the timing chain cover on the top motor see the VCs it is a 427 CAMMER,.that is same motor in the 1/16 coupe I posted the same motor that stared this coversation,...oh the 1 the ZEBm1 is calling a 429,...I'll be waiting a FORDFE.com for you

I probably don't have to tell a thing you can tell us all about it,.. And I'll be watching @ Fordfe site for a Posting,..since I've been there about 8yrs now they know me and my work ,BAD427SANG,...ROYCE PATTERSON you might know him Speed Vision had him on their channel as a leading Aurtority on Cougars and 427 and FE in general and if your smart enough you would look @ the timing chain cover on the Front of the 1/16 motor and then go back to your encyclopedia,... :wink:

the 427 Cammer is a the 1/16 ,..if you need CORRECT information go to FordFE.com,...You probably got your info from a book by PatGanahl, when you go there make sure you tell them what you spoutin here. Barry Beachum

I say MOTOR yes because I never bought EngineCraft Parts to fix my Fords(MOTORCRAFT) it's a 1/16 427 Ford Cammer,this 1 will be injected I will have a full body 35-35 Coupe that will have a 427 cross bolt and a 35-36 Roadster that will have a Blown 427Cammer,..I like my Fords to have Ford motors and my Chevies the same,..Cammers are in the FE series of ford motors late 50s thru mid 70s,...and I have a nice aluminum crossbolt in my1:1 shortbed 1/2 Ford PU :wink: Thanks, Barry Beachum

and the 31 caught my eye cuz I have on T widdle down to fit my 35-36 coupe body,...nice builds I need to finish it up Barry Beachum

Working on a FI systemthat will be incorporated with the hood, the rear suspension will be 4 link and a Mustang 2 front frt suspesion Thanks, Barry Beachum

And a Intake for this motor ,...I know these motors well ,I thought the topend would prove to be a little difficult Thanks, Barry Beachum

Got to have that Tach on the Hood ,..it makes the whole car

Thanks, Barry Beachum

A IMEX 1936 Springer Frontend and a RM 1/16,...you can go to my Fotki bbeachum,..I have not finished it yet ,..it was a bike to go with my 1/12 57 Chevy,..I've been busy with a 1/16 35-36 Ford Coupe trying to get it done enough to get it to the booth

The splintter tail,..Termanix is coming over to paint it for me

And Thought I might try this But I have a Camaro going on and a few other things so it will have to wait acouple months Barry Beachum

Barry Beachum

Well done Mark 8) 8) 8) 8) Barry Beachum

Talking to you soon,it don't have to pull weeds but the nose needs to come down ,Yes colors are still open,...I was working on the frame last nite,and I have got to finish the rear wheel wells,...I'm actually thinking tinted windows with some clean nice and wet looking paint and Detailed motor ,...maybe a pinstripe Thanks, BarryBeachum

Good in there too ,I have 2 1/16 427 Ford Cammers 1 blown and 1 Injected,I'm using 1/16 minicraft kit for the frame,...for Matt I was going to paint it HoK Lime Gold, Tint the windows light lime Green,and do some kind of Day Glo Red paint with a Day Glo Red grill support.I think those big fat rear rims will look good in Lime Green they might need a beauty ring ,The 427 Cammer might look something like this 1 when finished Thanks, Barry Beachum