New items available from Fireball Modelworks

[Chief Joseph]

Hello all,

I have some new items coming out now.

First off, my line of 1/24 Rally II wheels.  Right now there are three versions:

The G78-14 redline tires are available separately, too.

 

I post a lot of things on Facebook-- just search "Fireball Modelworks" and like my page
 

Thanks,
Joseph

[Chief Joseph]

Also available now are some Mopar steelie wheels in 1/24 scale:

The FMR-061 set is made for Mopar A12 cars, and I can also provide wider 15x9 rear wheels if you want to put drag radials on your Sixpack Superbee!
The 15" redlines are available separately, too.

[Chief Joseph]

Last but not least, 1/25 scale 20" Hurst Stunner wheels with matching Goodyear Eagle F1 tires for the modern muscle crowd.

These are available in two different sets:

FMR-065 is a set of four 20x9 wheels and four 245/45-20 tires
FMR-066 is a set of 20x9 wheels and 245/45-20 tires for the front, and 20x10 wheels and 295/35-20 tires for the rear.
both sets include decals for the centercaps.

Check out my website for full details on all these new sets, www.fireballmodels.info

[Mike Chernecki]

As usual these new products look awesome. Thank You Joseph for continuing to release spectacular  products.

[Erik Smith]

Those steel wheels look outstanding. Separate lug nuts? Dust cap/axle end? 

I have a few things from Fireball Modelworks and they are top of line aftermarket products. 

[av405]

I assume the 059 set would fit well with the AMT Dodge Monaco? Would we need new tires for those or do you know if your rims would fit with the existing tires?

[Mr mopar]

Awesome mopar wheels ........ I will have to get some!

[High octane]

Hmmm, and I've got a couple of 1/24th Mopar projects comin' up.

[louie]

UNBELIEVABLE detail. I will be in touch. That you can count on. Thank you.     Jeff 

[Chief Joseph]

Thanks for the feedback, gentlemen.

I assume the 059 set would fit well with the AMT Dodge Monaco? Would we need new tires for those or do you know if your rims would fit with the existing tires?

These rims probably won't fit the tires that come in the kit unless those tires are oversized for 1/25 scale.

[av405]

Thank you.

[JTalmage]

Oh man, Rally II's with trim rings?? Just what I need for my Rockford Files build! What tires fit those properly? any whitewalls?

[Mr Stock]

Joseph those steel mopar wheels look great, are there any plans to do them in 1/25 ?, they are just what I need for the AMT 68 Roadrunner

[Chief Joseph]

Oh man, Rally II's with trim rings?? Just what I need for my Rockford Files build! What tires fit those properly? any whitewalls?

They are 14" in 1/24 scale, so they'll fit just about any 1/25 scale 15" tire.. Finding whitewalls to fit these wheels should not be a problem.

[Chief Joseph]

Joseph those steel mopar wheels look great, are there any plans to do them in 1/25 ?, they are just what I need for the AMT 68 Roadrunner

Mopar steel wheels seem to be available in various 1/25 scale kits, so I don't have any plans to do them in 1/25.  These sets are meant to give some options for folks building the Monogram line of 1/24 Mopars, such as the '69-1/2 Suberbee, the '70 Superbird, and the Challenger & Cuda kits.  They could be used on a 1/25 model with little trouble, but might appear somewhat oversized to a trained eye.

[JTalmage]

They are 14" in 1/24 scale, so they'll fit just about any 1/25 scale 15" tire.. Finding whitewalls to fit these wheels should not be a problem.

I currently have the old AMT Pontiac Rally II's from the old 69 firebird kit which I think was 1/25, and the goodyear polyglas GT's from the revell/monogram 71 cuda/70 chevelle as the tires I'm using.. but I think they're 1/24th if I'm not mistaken. I mix scales so much I sometimes don't pay attention. But everything is going on a 1/24 scale Revell/Monogram firebird... so its a hodge podge... just dont want the tires to be too "short" looking. I'll have to take a look at the tires you offer with whitewalls and see whats out there.

[Greg Wann]

You are absolutely amazing to be able to offer these items.

[Mr Stock]

Mopar steel wheels seem to be available in various 1/25 scale kits, so I don't have any plans to do them in 1/25.  These sets are meant to give some options for folks building the Monogram line of 1/24 Mopars, such as the '69-1/2 Suberbee, the '70 Superbird, and the Challenger & Cuda kits.  They could be used on a 1/25 model with little trouble, but might appear somewhat oversized to a trained eye.

Thanks for the reply Joseph

[freakshow12]

With the steel wheels will we have the option of all the various dodge/ Plymouth dog dish caps?

[volvoRsport]

Looking really good as usual! It would be nice to see some steering wheels (Chevy Comfort Grip and Mopar Tuff) and some single/dual snorkel air cleaners from you also (in 1/25).

[mikemopar70]

Fireball Modelworks is first grade quality, and always fill voids in modeling goodies...

I already placed an order!!!! 

[Mike Chernecki]

I received  a set of the A12  Mopar wheels. Simply amazing, every detail of the 1:1 wheel is captured. They are even pre-drilled for valve stems. Joseph has created another winner.

[Erik Smith]

I just received my order from Joseph at Fireball. I can't say enough about the quality and service he provides. He also provides detailed instructions on prep and use. Excellent, top tier business.