Guest zebm1 Posted May 30, 2008 Posted May 30, 2008 Naming cars by its' skin is easy, now let us see how many real car crazy guys are in here! Here's an easy one..... Year, make and type.....
Kenny Posted May 30, 2008 Posted May 30, 2008 Looks like a Lincoln V12 to me. I dunno what year - 1935?
Guest zebm1 Posted May 30, 2008 Posted May 30, 2008 Guess I'm gonna have to change tha pic IDs.....sneaky ol' poot...... 1937 Lincoln Zephyr
Guest zebm1 Posted May 30, 2008 Posted May 30, 2008 Ok Guys, here's a little harder one..... Make, year and engine......
Guest zebm1 Posted May 30, 2008 Posted May 30, 2008 Almost gramps, but yu'll have to dig deeper.......
ismaelg Posted May 30, 2008 Posted May 30, 2008 That's the 302 "HEMI" Chevy engine prototype. The exhaust manifold gives it away
george 53 Posted May 30, 2008 Posted May 30, 2008 Actually Bill,it isa 69 z-28 with a cross ram intake but, its the HEADS that make it unique.There a VERY raer set of porkypine heads made to fit ona small block.They were a Smokey Yunick creation in conjunction with Chevy racing.only a few pairexsist like 3 or 4.Made of "unobtainium"
george 53 Posted May 30, 2008 Posted May 30, 2008 Ismael They arent "hemi" heads as much as "semi hemi" heads. THey are Big BLock style heads specially cast to fit a small block chevy.With matching Intake and exhast manifolds,Think Small Big block.
george 53 Posted May 30, 2008 Posted May 30, 2008 OH yeah FURD STOLE this idea when they made the copy cat 302/351 Cleveland Boss motors in 69(that WONT interchange with other furd motors of the SAME displacement)
Biscuitbuilder Posted May 30, 2008 Posted May 30, 2008 In line 12 cylinder monster. Maybe Packard? "Maybe"???? Well you just "May-be" right, Ismael. It is the one and only inline 12-cylinder engine ever built--Packard, in 1930. Installed in a '29 Packard, it was driven until 1945 by Alvan MacCauley, President of Packard. If a straight 8's virtue was "smooth" this one had to be as slick running as a wet otter on STP. It was a bit of an engineering nightmare though--in order to prevent excessive crankshaft twisting under acceleration, each main journal of the crankshaft was progressively larger in diameter than the ones in front of it, the rear main being over 3" in diameter. Long? You bet it was--considering that the head of a Packard 110 6-cylinder is approximately 30" long, this 12 has to be at least 6 feet in length. I've seen one picture of the car, taken in the late 1930's (it was scrapped in 1945), and the hood looks to be nearly 8 feet long. Add to that the cowling, the seating position of the driver, and the length of the front bumper brackets--Mr MacCauley had to have had to plan on at least 15' of car out in front of his eyes! Biscuitbuilder1
ismaelg Posted May 30, 2008 Posted May 30, 2008 I knew there were no mainstream inline 12s, so it had to be special. I thought Packard but I also had Deusenberg in my mind. If any company could come up with something like that, those two (among a few others) could.
OneTrickPony Posted May 30, 2008 Posted May 30, 2008 Engine ID Game Anyone else played this? I managed 16 out of 18.
Biscuitbuilder Posted May 30, 2008 Posted May 30, 2008 I knew there were no mainstream inline 12s, so it had to be special. I thought Packard but I also had Deusenberg in my mind. If any company could come up with something like that, those two (among a few others) could. Except that Duesenberg NEVER built an automotive engine with more than 8 cylinders, and never a flathead engine with their name on it (although Augie Duesenberg did attempt to produce, on his own, circa 1940, a flathead inline 6 marine engine!). Now, in boat racing, Augie Duesenberg, on his own in his race engine shop, did build a couple of W-24 engines for Horace Dodge Jr's Delphine, an unlimited hydroplane. Biscuitbuilder
Frank Steffens Posted May 30, 2008 Posted May 30, 2008 (edited) Ok Guys, here's a little harder one..... Make, year and engine...... I will name this engine.....Patrick. :rimshot: Thanks folks, I'm here all week, tip your waitress and try the veal....and remember, the 9:00 show is much different than the 7:00 show! Edited May 30, 2008 by Frank Steffens
Biscuitbuilder Posted May 30, 2008 Posted May 30, 2008 OK, guys, this engine is??????? By the way, it's NOT an import! Biscuitbuilder
Biscuitbuilder Posted May 30, 2008 Posted May 30, 2008 Is it out of the Tucker? Count the sparkplugs, then consult your Tucker info, and decide! Biscuitbuilder
Biscuitbuilder Posted May 30, 2008 Posted May 30, 2008 Everybody isn't a engine expert like you are. Geez, I didn't set out to strike a nerve here! Biscuitbuilder
Nick F40 Posted May 30, 2008 Posted May 30, 2008 (edited) Naming cars by its' skin is easy, now let us see how many real car Are you sure about that! I know one thing, I know my W block engines and Cadillac and Buick engines and Ford 289s......apparently Edited May 30, 2008 by Nick F40
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now