Paasche TG#2L Double Action Gravity Feed Airbrush

[Matt T.]

Does anyone use this model airbrush? If so, what has been your experience with it?

I currently have an Iwata Revolution for small detail work, but I need a bigger spray pattern to spray car bodies with paint and, ideally, 2K clear.

With the additional Paasche #3 tip/needle (.66mm) that I plan to buy, it seems a 3" spray pattern is attainable.

What adaptor would I need to connect this to my Iwata Sprint Jet compressor hose?

Thanks in advance for any input you can provide!

Matt

[935k3]

I have the Talon with all three tips. I would use the.66mm for bodies. Proper thinning is important. I do not use a ratio. I touch the mixer to the jar and see how quickly runs down the side of the jar. You need to search for a Paasche to Iwata adapter or Paasche to Grex which is what I use. I think Paasce's hose fittings are not that good(not enough threads)

[Pete J.]

Call the good folks at Coast Airbrush in Anaheim, Ca. 714 635-5557 and they should be able to hook you up(sorry for the pun).  They are my go to source for all things airbrush.  Good people, high level of knowledge.

[Matt T.]

Thank you, gentlemen.