Dyno Don's Eliminator II - New Camera - New Photos

[TooOld]

On 9/10/2019 at 4:22 PM, Codi said:

Nice clean build Bob.  Your background (and floor) in your pics really do justice to the car.  Nice photography too!  cheers, tim

Thanks Tim !  Working on the photography part and it's definitely getting better . 

[Fairfax]

Very nice Mercury Cyclone.

[TooOld]

23 hours ago, Fairfax said:

Very nice Mercury Cyclone.

Thanks ! 

[vintagercr]

Nicely done!

[TooOld]

22 hours ago, vintagercr said:

Nicely done!

Thanks much Steve !

[Lance Lawson]

Here's a shot of my Eliminator II under construction.  I got to see the real car  race in 1967 at Englishtown.  It ran mid 8's.  That Cammer shook the ground.  I used Dulpicolor paint for the finish.  I applied 2 coats of primer, sanded, 2 coats of color followed by 3 coats of clear.  I applied  the decals before clear coating the body.   The finish will be wet sanded with 2000 grit then buffed.  I have a second model still boxed and may use a body from the standard  1967 Comet Cyclone kit since it has the proper wheel  base. The original car used a standard wheel base.

Edited May 8, 2022 by Lance Lawson

[TransAmMike]

 

13 minutes ago, Lance Lawson said:

Here's a shot of my Eliminator II under construction.  I got to see the real car  race in 1967 at Englishtown.  It ran mid 8's.  That Cammer shook the ground.  I used Dulpicolor paint for the finish.  I applied 2 coats of primer, sanded, 2 coats of color followed by 3 coats of clear.  I applied  the decals before clear coating the body.   The finish will be wet sanded with 2000 grit then buffed.  I have a second model still boxed and may use a body from the standard  1967 Comet Cyclone kit since it has the proper wheel  base. The original car used a standard wheel base.

Sure looks good Lance. I see this is you first post. Welcome to the forum!!