Rolls-Royce No Chemicals, No Paint, No Harmful Glues

[Anglia105E]

37 minutes ago, stitchdup said:

another thought. if its something you wont use often you could sharpen short sections of pipe. 

Good thinking Les . . . That would indeed be a possibility.

I have just found a product on Ebay, which is only £8.99 and free delivery. Here is the link :https://www.ebay.co.uk/itm/265508480198?_skw=Hollow+Punch+Set&itmmeta=01KAPMGPD0KAKNP8JEXHE7EN4T&hash=item3dd189e4c6:g:FH0AAOSwk5tcj9Z0&itmprp=enc%3AAQAKAAAA8FkggFvd1GGDu0w3yXCmi1ftgxk--rXBNqSoPmtJWNWfYkuCIAdoc%2BYohQec%2BqfWg6LEuf4ZKAuJolZcMlE6DsQRgAe%2F3eoK18kG31kUxXnffmA7%2FDP%2F7hGDYLyeIMMerSxIFBnw8Er5AY%2FPxJCRXlNvRO08lopUt50BX4tEPkt5YQeRSrD67xNzJmzmzRCOi4K1TCD1%2B7%2BoXwF2LMWIyneCsTU1oOt%2B8734BWK0C13do%2F%2Bv5RLia58XGtRVgv9v6Atg%2FXeYF%2BBXlR47iDE6ZCN3%2Fte%2F0E791KvW32Po3U6oZ7xt9yhHBtI5DCClEmkp1g%3D%3D|tkp%3ABFBM9ubC1NVm

Two photos below also

David

[MarkJ]

David, what is the diameter of the outer ring? If it's less than 19mm you will be good to go with that hole punch kit you posted. I'm sure it should cut through a wide piece of masking tape. Man, I'd like to get one of those kits too.

[Anglia105E]

3 hours ago, MarkJ said:

David, what is the diameter of the outer ring? If it's less than 19mm you will be good to go with that hole punch kit you posted. I'm sure it should cut through a wide piece of masking tape. Man, I'd like to get one of those kits too.

Mark . . . The outer diameter of the ring that I have to paint in black is 12 mm, as shown in my sketch and the outer diameter of the wheel is 17 mm.

This tool on Ebay should be just what I need, and it doesn't cost much.

You could place an order on Ebay if you want one of these kits for yourself ?

David

[MarkJ]

5 hours ago, Anglia105E said:

Mark . . . The outer diameter of the ring that I have to paint in black is 12 mm, as shown in my sketch and the outer diameter of the wheel is 17 mm.

This tool on Ebay should be just what I need, and it doesn't cost much.

You could place an order on Ebay if you want one of these kits for yourself ?

David

David. I think somebody mentioned a store called Harbor Freight which I have a few miles away in the next town that I'm going to check first but I surely want this tool in my arsenal.

Mark J.

[Anglia105E]

13 minutes ago, MarkJ said:

David. I think somebody mentioned a store called Harbor Freight which I have a few miles away in the next town that I'm going to check first but I surely want this tool in my arsenal.

Mark J.

Okay Mark . . . Harbor Freight sounds good and we don't have those stores here in England . . . This might turn out to be a very useful tool.

David