Revell '30 model A

[rattle can man]

Has anyone checked the fit of the old Monogram 5 window coupe against the new tool Revell? I'm contemplating how to un-chop one of the Revell kits. There are the different roof treatments from an original kit, so the options could end up interesting.

[Smitty]

They are different scales, the Monogram kit is 1/24. The Revell Model A kits are 1/25. I’m not sure if that’s an issue or not.

Edited yesterday at 01:02 AM by Smitty

[Ace-Garageguy]

17 minutes ago, Smitty said:

They are different scales, the Monogram kit is 1/24. The Revell Model A kits are 1/25.

Exactly. The old Monogram kit is noticeably larger.

It's getting spendy, too.

You could un-chop one of the recent coupes using pillar sections from another one.

Nothing but careful measuring and cutting and fitting required.

 

[Chris V]

A well renowned resin caster is currently working on an authentically detailed ‘30 Coupé body conversion in 1:25 scale

[Fat Brian]

Unchopping it shouldn't be too bad, the roof section is a separate piece so its easy to work with. Since they're great kits and you will probably build more than 1 anyway use the top section from the second kit to make one standard height roof and one super chopped one. I chopped mine an additional 3 or 4 inches, that is about enough to bring one back to stock if you put the long sides together. Cut one roof close to the bottom of the pillars and the other close to the roof and switch the tops to the other bottom.

Here's a picture of mine, you can see the seam where the roof meets the body through the window. The hardest cut is on the back, the rear window is kind of high so the cuts have to angle down to meet the side cuts.