'32 Ford Tudor Sedan

[Kit Karson]

Somehow this solution is so what I expected from you, Brother! -KK

[Speedpro]

Got a start on the exhaust system. The pipes came from the '32 roadster kit (black w/flames). The pipes were glued together just under the rear end housing and a hole was drilled to locate the pipes during mockup. The gas tank required some work to clear the pipes as needed. After the tank mods, the rear end was mounted to make sure things were fitting. Some tape was put on the inside of the body and the pipes were trimmed to fit against the body to see were it needs to get  holes for the tips too come through.  

 

 

Still thinking about the exit at the rear. In the meantime, there is work to be done on the rest of the system. Till next time.......................