1/24 scale Lug nuts and lugs

[Romell R]

Hey fellas If anyone know where I can find 1/24th scale bolts and nuts, that can be used as lugnuts & lugs please let me know. I been looking for a company I used to deal with but I can no longer find them. Thx in advance for any help you might be able to provide. Romell

[Guest old man]

you can try scalehardware.com they may have what you are looking for

[lrlocke01]

I have seen people use a D or G guitar string for lug studs, a cheap will cost about 5 bucks and you could make alot with a pack.

Oh, you could also use the smaller strings for antennas and such.

[Art Laski]

This might be of interest to you...

http://www.protechmodelparts.com/detailingwheels.htm

[Blake Rogers]

lrlocke01 i was going to say that to i see you like lamb of god !!

[shucky]

scalehardware for sure. Bob is great. Also RB Motion now has a website.

[torinobradley]

Also, you can look for Grant Line and Tichy Train Group plastic nuts and bolts in the train section of a well stocked hobby store. Look at them carefully. Along with normal hex bolts, there are square ones and both types with washers. You can also file/sand off the end of the bolt sticking above the nut and make it the bolt head.

I like these because they are about $3 for 40-50 or so, already have a bolt sticking out of the nut and also have a shaft that makes them easier to install.

Edited July 7, 2010 by torinobradley

[Romell R]

you can try scalehardware.com they may have what you are looking for

Thx this was of great help I got what i needed. And there service is top rate.

[Romell R]

Also, you can look for Grant Line and Tichy Train Group plastic nuts and bolts in the train section of a well stocked hobby store. Look at them carefully. Along with normal hex bolts, there are square ones and both types with washers. You can also file/sand off the end of the bolt sticking above the nut and make it the bolt head.

I like these because they are about $3 for 40-50 or so, already have a bolt sticking out of the nut and also have a shaft that makes them easier to install.

thx bro for the info I love these guys too I have a box of there stuff, but i needed actual threaded lugs and nuts. I was able to get them at scalehardware

[whale392]

As for lug nuts, I have found that (even though it is expensive) Plastruct hex shapes works well and comes in sizes that can be used for lug nut detail if cut to the proper length.