Cleaning up edges

[sjordan2]

I see a lot of builds here that could use a simple finishing process (unfortunately, I am not able to post pictures). However:

On chrome bits, and on things like windshield and other window surrounds, take a thick, water-soaked toothpick to burnish off rough edges. These areas need to be smoothed and sanded. If you're working on chrome-plate parts, be very slow and gentle; you may need to touch up with a tiny bit of Sharpie or paint if you've buffed too much.

[Mr. Moparman]

Or use a X-acto knife with a #11 blade.

[sjordan2]

Or use a X-acto knife with a #11 blade.

I don't think you get what I'm talking about. As I indicated above, this tip relates primarily to chrome sprue pieces such as the edges of wheels and body trim; knife work is for scraping and could remove too much chrome. The key is to be as soft as possible with just a little burnishing. An X-acto will work to a point, but is very harsh, and a fine needle file would be better. But this suggestion is for creating as little damage as possible.

Edited August 29, 2010 by sjordan2