Ross Engines

[snack truck]

Can anyone inform me of the best glue to use on these engines. I started building an engine, and put on some CA glue, placed the parts together, and went to adjust them, and bingo, the parts were welded together instantly. Seems there is no wiggle room with resin. This is the first resin I have worked with. Any advice would really be appreciated.

[Casey]

You used the correct glue.

[highway]

Mike, as Casey said, you are using the correct glue. The best I could suggest if you want some wiggle room is test fit the parts together first, then when you have the parts where you want them, put some thin CA in the joint. The capillary action of the thin glue will (or at least should) draw the glue into the joint. That way the parts will be in the position you want them and where they should be.

[John Pol]

I would use Zap a gap.It takes longer to dry so can move it around before it sets.

John Pol