snack truck Posted December 19, 2010 Share Posted December 19, 2010 Can anyone inform me of the best glue to use on these engines. I started building an engine, and put on some CA glue, placed the parts together, and went to adjust them, and bingo, the parts were welded together instantly. Seems there is no wiggle room with resin. This is the first resin I have worked with. Any advice would really be appreciated. Quote Link to comment Share on other sites More sharing options...
Casey Posted December 19, 2010 Share Posted December 19, 2010 You used the correct glue. Quote Link to comment Share on other sites More sharing options...
highway Posted December 19, 2010 Share Posted December 19, 2010 Mike, as Casey said, you are using the correct glue. The best I could suggest if you want some wiggle room is test fit the parts together first, then when you have the parts where you want them, put some thin CA in the joint. The capillary action of the thin glue will (or at least should) draw the glue into the joint. That way the parts will be in the position you want them and where they should be. Quote Link to comment Share on other sites More sharing options...
John Pol Posted December 19, 2010 Share Posted December 19, 2010 I would use Zap a gap.It takes longer to dry so can move it around before it sets. John Pol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.