Question about Decanting a Spray Can of Paint

[BRIAN46]

What is the best method for Decanting Paint to use in an Airbrush. Does any one have a turtutioral about this subject. Any information appreciated. Thanks

Brian Pardue

[jsimmons]

What is the best method for Decanting Paint to use in an Airbrush. Does any one have a turtutioral about this subject. Any information appreciated. Thanks

Brian Pardue

There are a number of tutorials or technique discussions. I googled "decanting spray paint", and got back over 42000 results.

[Keef]

http://www.modelcarsmag.com/forums/index.php?showtopic=4122&st=0&p=27172&hl=+decanting%20+spray%20+paint&fromsearch=1&#entry27172

[Zoom Zoom]

Nowadays I'm even lazier w/decanting; I wear disposable gloves and hold the straw up next to the nozzle and spray into the cup. Very little mess, if any, and I shoot in the spray booth itself on newspaper.

If I decant more than I need, I save it in a glass jar for the next time (clear, semigloss and flat black I use all the time, so I save what is left if any).

[Evil Appetite]

I use a drilled out nozzle. I have 2 set up and ready to go. 1 using a Testors nozzle, and the other a Tamiya nozzle. I drilled out the hole on the nozzle, stuck a length of small diameter brass tubing in there and sealed it with 5 minute epoxy. I bent the tube at a downward angle an inch or so away from the end and that's it. Works great. When i'm done, i run afew drops of thinner through it to clean it all up.