1/16th scale Small Block Chevy 4 barrel intake and Carb?

[Nick Winter]

I have a Revell 16th scale '34 ford and I'd like to put a 4 barrel on it, just wondering if such a part exists, and where I can get it, I'd like a aftermarket style 4 barrel intake, carb and air cleaner, this will be hopefully my first finished 16th scale.

Nick

[Rdkingjay]

Nick,

I think Charlie at Pro-tech has a couple of resin holley four barrels, in 1/16th coming out very soon. He is a member on this board and has a steadily growing parts list of 1/16th goodies that are available and fourth-coming.

[Casey]

You must have the '34 Ford 3-window coupe, as the Phaeton includes a 4-bbl aftermarket intake manifold and two-piece 4-bbl carburetor. The carb isn't the best, and I think the carb from the DOH '69 Charger kit is much better detailed, but it's probably a 850cfm+ carb, so it may look oversized on a street vehicle.

The air cleaner which is included is about 10" in scale diameter, and it's from the billet era, so that may be a good or bad thing, depending upon your opinion.

[ajwheels]

TDR may have a 1/16 Holley available..............you might send a note along to tdr.innovations@gmail.com and see what's up...............

[Nick Winter]

You must have the '34 Ford 3-window coupe, as the Phaeton includes a 4-bbl aftermarket intake manifold and two-piece 4-bbl carburetor. The carb isn't the best, and I think the carb from the DOH '69 Charger kit is much better detailed, but it's probably a 850cfm+ carb, so it may look oversized on a street vehicle.

The air cleaner which is included is about 10" in scale diameter, and it's from the billet era, so that may be a good or bad thing, depending upon your opinion.

Casey, I forgot to mention I do have the Coupe, might try and locate those parts from the Phaeton and add the Pro Tech carb previously mentioned.

Thanks,

Nick

[eviltwincustoms]

TDR may have a 1/16 Holley available..............you might send a note along to tdr.innovations@gmail.com and see what's up...............

I agree, I would hit up TIM... they have a 4 barrel carb just not on the site. I am sure Tim could get it added and scaled down to 1/16 so you can purchase as many as you would like.