hotrod59f100 Posted January 19, 2012 Posted January 19, 2012 My uncle is getting back in the hobby. His first one on the bench is a 1948 woody . He wants to know what's the best way to make the wood 2 tone and do it realistically ?
Guest Posted January 19, 2012 Posted January 19, 2012 I did this one by painting the bed floor with one color of brown, then going over it with a darker shade. When I did the darker shade, I dabbed the brush on a paper towel a couple of times to get most of the paint off of the brush,then just dragged it over the other color in a random pattern. This was my first and only attempt,so I'm no expert at it.
hotrod59f100 Posted January 19, 2012 Author Posted January 19, 2012 I did this one by painting the bed floor with one color of brown, then going over it with a darker shade. When I did the darker shade, I dabbed the brush on a paper towel a couple of times to get most of the paint off of the brush,then just dragged it over the other color in a random pattern. This was my first and only attempt,so I'm no expert at it. Looks good. Does any one know if oil based or water based house hold stains work.
Ramfins59 Posted January 19, 2012 Posted January 19, 2012 OK, this is a '48 Ford Woody I built about 10 or so years ago. I used Testors sand, wood and leather paints to do the Woody framing, and then cut pieces of cigar wood/paper to fit the insert panels. I trimmed the wood/paper to the size of the kit supplied decals so they would fit perfectly. I glued in the wood/paper with thinned Elmer's glue and once all was dry, I brushed on some enamel clearcoat over the wood/paper. The wood/paper comes in packaging for some cigars. The cigars come in aluminum tubes with a piece of the wood/paper wrapped around the cigar, but the wood/paper is curled up and very dry and brittle. Wet the wood/paper and lay it between the pages of a thick book (like a phone book) until it dries and then it will lay flat. Then you can cut it to whatever size or shape you need using either very sharp scissors or an X-Acto knife. I personally don't smoke cigars, but my cousin does and he saves me all his wood/paper. Sorry for such a long-winded description but I thought this would help, especially due to the fact that nothing really looks more like wood than real wood. This wood/paper can be used for interior, dashboard panels, door panels, etc...
hotrod59f100 Posted January 19, 2012 Author Posted January 19, 2012 OK, this is a '48 Ford Woody I built about 10 or so years ago. I used Testors sand, wood and leather paints to do the Woody framing, and then cut pieces of cigar wood/paper to fit the insert panels. I trimmed the wood/paper to the size of the kit supplied decals so they would fit perfectly. I glued in the wood/paper with thinned Elmer's glue and once all was dry, I brushed on some enamel clearcoat over the wood/paper. The wood/paper comes in packaging for some cigars. The cigars come in aluminum tubes with a piece of the wood/paper wrapped around the cigar, but the wood/paper is curled up and very dry and brittle. Wet the wood/paper and lay it between the pages of a thick book (like a phone book) until it dries and then it will lay flat. Then you can cut it to whatever size or shape you need using either very sharp scissors or an X-Acto knife. I personally don't smoke cigars, but my cousin does and he saves me all his wood/paper. Sorry for such a long-winded description but I thought this would help, especially due to the fact that nothing really looks more like wood than real wood. This wood/paper can be used for interior, dashboard panels, door panels, etc... Wow it does look good . The centers look perfect .On the trim boards he plans on doing a blond wood look .almostlike raw yellow pine with a clear coat. Thanks for the tip I'll use that for my self as well.
espo Posted January 22, 2012 Posted January 22, 2012 I did a wood bed in a 50 Ford pick-up useing a paint layering technique I read about on one of the forums. The base coat was Tamiya TS-68 Wooden Deck Tan. Next I used some Tamiya X-33 Bronze that was lightly deluted, which I wiped lightly so that it would stay on edges of the wood grain molded into the bed. Next I used Tamiya X-26 Clear Orange which again was wiped of with a terry towel. You could use verying colors for darkness.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now