Drag radials and turbos

[george 53]

Bill, they are 275-60 15's for the small ones(thinner) and 325-50 15's for the larger ones. They measure o6 mils on the thin ones, and 10 mils on the thicker ones. The thinner ones fit the Nova rear wheelwells VERY nicely. The larger ones fit the Revell 69 Charger VERY nicely. they both measure 21 mils tall. Hope this hepls somehow.

[FAST442]

I'll take several of each of the turbos and drag radials. Pm me with prices, thanks

[gonzo64nova]

Bill, they are 275-60 15's for the small ones(thinner) and 325-50 15's for the larger ones. They measure o6 mils on the thin ones, and 10 mils on the thicker ones. The thinner ones fit the Nova rear wheelwells VERY nicely. The larger ones fit the Revell 69 Charger VERY nicely. they both measure 21 mils tall. Hope this hepls somehow.

George,thanks for the help ,but your measurements seem very small,are you measuring in milimeters? If you could measure them with a digital micrometer that would be a big help. BILL

[dmk]

.....at this time I will take drag radial orders but not take any other new orders until I'm caught up & finish the masters for the cars I've been working on. I enjoy the challenges of mastering/casting but have run out of spare time & need to replenish my supply.

Oh man, I hate to hear that. You make some awesome looking 4x4 tires and you are probably the only place to get something like that.

Any idea when you might be able to do a set of those unique mud tires again?

Edited October 1, 2012 by dmk

[cnaind]

Oh man, I hate to hear that. You make some awesome looking 4x4 tires and you are probably the only place to get something like that.

Any idea when you might be able to do a set of those unique mud tires again?

Hi Dave,

It will be a couple-3 months before I take any big tire orders; if I'm ready sooner I'll post it here.

Thanks!

[dmk]

Hi Dave,

It will be a couple-3 months before I take any big tire orders; if I'm ready sooner I'll post it here.

Thanks!

Thanks Alan. I'll try to be patient.

Good luck with your projects!

[george 53]

Bill, I'm measurein 'em with a 25th scale ruler!!! LOL!!!! Sorry if it's not accurate.

Edited October 1, 2012 by george 53

[Alan]

Who makes and sells the 1/25th M/T Drag Radials ................... and is there any contact info out there ?

Thanks

Alan