Tompidom Posted March 15, 2013 Share Posted March 15, 2013 This is getting better and better every update! Quote Link to comment Share on other sites More sharing options...
Mauricio Meyer Posted March 15, 2013 Author Share Posted March 15, 2013 (edited) Amazing build. How do you paint the tiny detail like panel lines and "corvette" letters AFTER you've done the main colour?? Hi Troy! The panel lines are painted with a flat black "wash": its more or less a drop of black acrylic flat paint and 8 drops of thinner. Once you have your wash mixed apply with a pointed brush, the wash must run throught the panel lines, don´t worry if the wash runs out of the panel line. Some times you have to do this two or three times, depending how deep you want the color. When the wash is dry remove the excess with a q tip with a little polishing compund (i use tamiya fine compound). Corvette letters where made: 1. Semi gloss black tamiya acrylic paint. 2. Coat of Ts-13 clear thorugh the airbrush to protect black paint. 3. Another "wash", this time made with red oleum artist paint and spirit. Apply the red wash, since oleum paints dries in two or three days you have plenty of time to remove excess, in fact it's even easier to do this the next day because the paint is like jelly, again with a q tip this time sunked in spirit, or threbentine remove excess carefully (you don,t want to remove all the paint =)). I chose olium paint because the pigment covers much better that the acrylics wich are a bit transparent. For me the result is better. Hope this helps! =) Len, Tom, thanks for your interest and comments! Edited March 15, 2013 by Mauricio Meyer Quote Link to comment Share on other sites More sharing options...
Art Laski Posted March 16, 2013 Share Posted March 16, 2013 Great building! Quote Link to comment Share on other sites More sharing options...
Mauricio Meyer Posted March 20, 2013 Author Share Posted March 20, 2013 Hi everybody, A few updates, Finished engine bay: Painting orange the edge of the lights cover, in order to hide cement bubbles: Micromark punch hole set used to make tiny transparent circles: It can make circles from 6mm to 1mm aprox: The little circles were glued inside the lights to achieve a more realistic finish: I started scratch bulding the seat belts locks: Quote Link to comment Share on other sites More sharing options...
Ford guy Posted March 20, 2013 Share Posted March 20, 2013 Great looking build. You attention to detail is outstanding. Can't wait to see more. Roy Quote Link to comment Share on other sites More sharing options...
Mauricio Meyer Posted March 24, 2013 Author Share Posted March 24, 2013 Thanks for your comments! Updates to the interiors, hope you like it! Quote Link to comment Share on other sites More sharing options...
Gldknght7 Posted March 24, 2013 Share Posted March 24, 2013 I've never seen that flocking used, question: How do you make the stuff stick to the plastic? Quote Link to comment Share on other sites More sharing options...
Erik Smith Posted March 24, 2013 Share Posted March 24, 2013 That's looking great. This shows how attention to detail, varying finishes, and adding small details can make a model look close to real - no huge budget on aftermarket stuff needed. Nice work. Quote Link to comment Share on other sites More sharing options...
Mauricio Meyer Posted March 24, 2013 Author Share Posted March 24, 2013 I've never seen that flocking used, question: How do you make the stuff stick to the plastic? Hi Douglas! I use white glue with a little water, brush it on the surface and add the flocking. Here a very nice tutorial by Alex Kustov, shure he explain it better than i do! http://www.italianhorses.net/Tutorials/Flocking/flocking.htm Quote Link to comment Share on other sites More sharing options...
Mauricio Meyer Posted March 24, 2013 Author Share Posted March 24, 2013 That's looking great. This shows how attention to detail, varying finishes, and adding small details can make a model look close to real - no huge budget on aftermarket stuff needed. Nice work. Thanks Erik, yes, i totally agree! Quote Link to comment Share on other sites More sharing options...
Duntov Posted March 25, 2013 Share Posted March 25, 2013 I am really liking this build.... attention to detail and workmanship is first rate!!!! Quote Link to comment Share on other sites More sharing options...
Dragfreak Posted March 25, 2013 Share Posted March 25, 2013 Beautiful work! Quote Link to comment Share on other sites More sharing options...
slusher Posted March 25, 2013 Share Posted March 25, 2013 Excellent detail and work... Quote Link to comment Share on other sites More sharing options...
Gldknght7 Posted March 25, 2013 Share Posted March 25, 2013 Hi Douglas! I use white glue with a little water, brush it on the surface and add the flocking. Here a very nice tutorial by Alex Kustov, shure he explain it better than i do! http://www.italianhorses.net/Tutorials/Flocking/flocking.htm Actually your explanation makes perfect sense to me. I used a similar technique to lay down felt carpet in a van model and a station wagon model back in the late 70's. I think I remember mixing the white glue with Testors tube cement. Quote Link to comment Share on other sites More sharing options...
kangee Posted April 7, 2013 Share Posted April 7, 2013 Awesome work. We can learn a lot of scale building through your WIPs Quote Link to comment Share on other sites More sharing options...
DPink Posted April 7, 2013 Share Posted April 7, 2013 How did you build the seat belt locks? Quote Link to comment Share on other sites More sharing options...
kendog261 Posted April 7, 2013 Share Posted April 7, 2013 very nice build love the detail work Quote Link to comment Share on other sites More sharing options...
7000in5th Posted April 8, 2013 Share Posted April 8, 2013 (edited) Excellent! Thanks for sharing! Edited April 8, 2013 by 7000in5th Quote Link to comment Share on other sites More sharing options...
jaydar Posted April 8, 2013 Share Posted April 8, 2013 Mauricio, Perfetto! joe. Quote Link to comment Share on other sites More sharing options...
shucky Posted April 8, 2013 Share Posted April 8, 2013 Mauricio,your doing such an amazing job. The interior looks fantastic as does the rest of the build. I love all of the small details, textures, and colors used. Its very convincing. Thanks for sharing. Quote Link to comment Share on other sites More sharing options...
Mauricio Meyer Posted April 9, 2013 Author Share Posted April 9, 2013 How did you build the seat belt locks? Hi Daniel! i made them with a piece of plastic sheet, just cut them and sand them into shape. Thanks to everybody for your recent positive comments i apreciate them! Quote Link to comment Share on other sites More sharing options...
Mauricio Meyer Posted April 9, 2013 Author Share Posted April 9, 2013 Hi again! Here are the las details on this built: Fog lights covers: Rear view mirror: Seat belt locks ready: Main lights: Wheels: Quote Link to comment Share on other sites More sharing options...
Mauricio Meyer Posted April 9, 2013 Author Share Posted April 9, 2013 This built is now ready, soon i will post the pictures in the "under glass" section. Quote Link to comment Share on other sites More sharing options...
LacrosseBoss Posted April 10, 2013 Share Posted April 10, 2013 I'll be looking for it there for sure. Your small details are incredible. Excellent engine bay, what wedge did you use to JUST fit the engine in there ? Incredible interior. Quote Link to comment Share on other sites More sharing options...
Tompidom Posted April 10, 2013 Share Posted April 10, 2013 Really enjoid following the WIP looking forward to the finished pic's Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.