acmiaz Posted March 27, 2013 Share Posted March 27, 2013 This is a Tameo 1/43 Lotus 79 that represents the car Mario Andretti used to win the 78 F1 World Championship. Quote Link to comment Share on other sites More sharing options...
XJ6 Posted March 27, 2013 Share Posted March 27, 2013 I wanted to build something different a while back ago...so i built the LOTUS TYPE 79 "1978" Tamiya Kit No.20060 1/20 scale...and Boy that was a tricky Build..lot of challenge ...Very happy with the way it turned out....But i have yet to put the decals on so after seeing yours.....Which by the way is out Standing !!! and Completed I am going to finish it up with the decals... That's what's nice about this place come on here poke around and see some of the best of builds.....and gives the Kick start to keep going.. Very Nice Job....Like the details... Cheers...Don Quote Link to comment Share on other sites More sharing options...
Webb Posted March 27, 2013 Share Posted March 27, 2013 Great work as always Mark. What all did you add to the basic kit? Or, are Tameo kits that detailed? Chris Quote Link to comment Share on other sites More sharing options...
acmiaz Posted March 27, 2013 Author Share Posted March 27, 2013 Great work as always Mark. What all did you add to the basic kit? Or, are Tameo kits that detailed? Chris Thanks! The WCT versions are very detailed all of them come with removable body panels which exposes very detailed engine, transaxle and suspension. I only had to add ignition wires, braided hose, battery cable and a couple of cockpit knobs. Quote Link to comment Share on other sites More sharing options...
jaydar Posted March 27, 2013 Share Posted March 27, 2013 Great job. I built a fair number of F! in 1/43 scale. I used a dremel bit for rivets. it was their tiniest engraver with a ball tip. it produced a smaller depression. joe. Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted March 27, 2013 Share Posted March 27, 2013 Sweet,,, Quote Link to comment Share on other sites More sharing options...
acmiaz Posted March 27, 2013 Author Share Posted March 27, 2013 Great job. I built a fair number of F! in 1/43 scale. I used a dremel bit for rivets. it was their tiniest engraver with a ball tip. it produced a smaller depression. joe. Thanks Joe, I will try that thanks for passing on the tip. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.