jwood Posted April 29, 2013 Share Posted April 29, 2013 For my next project I want to convert a 1964 Thunderbolt to a pro street machine. If anyone has built up a pro street version of this model car, what kit did you use for the back-half of the chassis? I think I have a 1966 Pro Street Nova kit in my stash that I could use but I was wondering if there's a beeter kit out there that I could use for the pro street chassis on the Thunderbolt? Thanks! JW Quote Link to comment Share on other sites More sharing options...
cobraman Posted April 29, 2013 Share Posted April 29, 2013 You may want to move this to the Q&A section. Might get more responce. Quote Link to comment Share on other sites More sharing options...
High octane Posted April 29, 2013 Share Posted April 29, 2013 Pro Street Thunderbolt? From what I heard, those Thunderbolts were lucky to be able to go in a straight line, yet alone around turns. Quote Link to comment Share on other sites More sharing options...
Guest Posted April 29, 2013 Share Posted April 29, 2013 (edited) Pro Street Thunderbolt? From what I heard, those Thunderbolts were lucky to be able to go in a straight line, yet alone around turns. Maybe you're thinking of pro touring. Pro streets are basically street legal drag cars. They're not built for making hard turns. The real cars dominated Super Stock in '64. So, they didn't have a problem going in a straight line either. I used the chassis from the Matt Hay pro street Thunderbird from Revell to build mine. You can find them on ebay pretty easily at a decent price still. I'll post a photo up later. This is an old build from around '99-'00 with Ken Brickell applied graphics. Edited April 29, 2013 by plowboy Quote Link to comment Share on other sites More sharing options...
Draggon Posted April 29, 2013 Share Posted April 29, 2013 Thats very nice Roger! Quote Link to comment Share on other sites More sharing options...
ScaleDale Posted April 29, 2013 Share Posted April 29, 2013 I'm looking at a similar project in the future using a Revell '64 Fairlane 500 and the '67 Chevell Pro Street kit as a donor car. The wheel bases and track are about the same and the Chevell comes with a narrowed and tubbed chassis to fit slicks without cutting the wheel wells. It has wheelie bars and a nice 4 link suspension too boot. It should adapt to the ford body and drive train with only a few minor headaches. Dale Quote Link to comment Share on other sites More sharing options...
jwood Posted April 29, 2013 Author Share Posted April 29, 2013 Thanks Roger, exactly the information I was looking for. Quote Link to comment Share on other sites More sharing options...
Sully Posted April 29, 2013 Share Posted April 29, 2013 (edited) Jesse, Here's a few pics of one I did a few years ago. I used the back half of the 67 Chevelle and mated it to the front half of the T-Bolt. Hope this helps a little. Edited April 29, 2013 by Sully Quote Link to comment Share on other sites More sharing options...
Guest Posted April 30, 2013 Share Posted April 30, 2013 Thanks Roger, exactly the information I was looking for. You're welcome Jesse. The T-Bird chassis isn't a simple cut and paste deal though. The front of the chassis has to be lengthened to center the front wheels. All you have to do is cut the frame rails in two, add roughly 3/8 of an inch between them and add the same amount on the top strut bars. I cut out all of the core support on the body of mine and used the firewall from the T-Bird also. Here's an underhood shot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.