1-8 '69 nitrous pro mod camaro

[futurattraction]

Sure Dave. True life dimensions would be great! Thanks so much...

Scott

[comp1839]

scott, here are some shots of a 5 stage dry sump pump.

it is 10 3/8" long.

3 1/4" wide and 3 1/4" tall. the radius in the sectionsis 1/4".

rear

[comp1839]

top

bottom

if you need more info. please ask.

[blackbeard]

dave the pump looks great and that is a big pump

[futurattraction]

Perfect! Thanks, so much, Dave!!

[comp1839]

did some more work to the pump. made a mounting plate and the final front section to the pump. also painted the front motor plate black.

front drive pulley.

[blackbeard]

looking great with the updates

[comp1839]

started making my fittings and lines. i will use fittings from different manufacturers and i will be making some of my own. i started by drilling some .125" brass tubing. using a #32 bit and going to a .125" depth. then i parted them off at .250". the counterbore willl let the rubber tubing fit in the brass while leaving the other end capable of holding the metal tube.

home made tubing bender.

finished line. this is the pressurized oil feed from the pressure stage of the pump.

[Magic Photos]

Great work as alway Dave, love the detail of this build.

[blackbeard]

very great work dave that line looks great

[comp1839]

thanks mike!

thanks henry!

a little more plumbing.

[blackbeard]

looking fantastic dave those lines look great

[Mooneyzs]

Dave... everytime tou post and update you always leave me wanting more. That oil pump is so killer and nice. Love the plumbing you created as well. I always admire your work and it makes me keep trying to step up my own building another notch. Looking forward to seeing what you next on this build.

[tyrone]

Killing it Dave... you know I love pro mods......

[stumay309]

Unbelievable quality love it

[futurattraction]

BEAUTIFUL job, Dave. I'm loving every step of the way.

[shift13]

I dont know if your insane or if im jealous. Probley mostly jealous

[GoatGuy]

Great info Dave. Thanks for sharing. I've never seen one of those pumps up close.

[comp1839]

henry, thanks!

chris, i'm kinda jumping around right now to keep it a little fresh. i was starting to get the soldered brass blues. needed to change it up a little. thanks buddy!

tyrone, i know you do!........me too!!!!!!!! i also love your work!!!!!!

stuart, glad you like the build. hopefully it will keep your interest.

scott, can't wait for some more of your updates.

allen, it's mostly my lack of mental stability......trust me. hehe. if you have any questions...... just yell.

dave, always a pleasure. i have a few of those floating around here. that's my newest / biggest.

Edited February 20, 2014 by comp1839

[cobraman]

Very nice work !

[Mooneyzs]

chris, i'm kinda jumping around right now to keep it a little fresh. i was starting to get the soldered brass blues. needed to change it up a little. thanks buddy!

Dave... I completely understand about jumping around to something different to keep it fresh and to help you not get burnt out on it. I know I am starting to feel burnt out on these Air Dams on the F/C body and have been debating on pulling my 1/16th scale Front Engine Dragster that I started over 17 years ago and painted right before I started the F/C to get some more work done on it and give me a change of pace from the this build I have been on for 3 years now.

[comp1839]

thanks ray!

chris, i can't wait for you to start your super secret project.....hehe.

got some more work done. i finished plumbing the pump. also made some god forsaken tiny decal for the pump sections.

i was really impressed with the ability of the printer on these. the fact you can read a word that is about .030" tall (maybe less), just amazes me. the decal is about 1/8" wide.

Edited February 22, 2014 by comp1839

[Belugawrx]

WoW

[blackbeard]

wow wow wow dave those tiny decal's look great and the plumbing looking great

[Skypower]

Awesome is about all I can say for that. Decals, great job.