Metalmad Posted March 4, 2013 Share Posted March 4, 2013 Well this another one I start a couple of months ago & since the Camaro is finished I start back up on the Hemi Dart. The color is Root Beer & the pic does not do it justice. I had to raise up the Hood scope to accommodate the aluminum stacks on the carbs. Reworked the rear wheel tubs for some wider meats and made a different rear end. The interior is just about finished just have to add a few details & a Tach yet. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 4, 2013 Author Share Posted March 4, 2013 Also built a custom center console & shifter & the bezel that is over the shifter. Will also be installing front discs & calipers and may try to run the brake lines also & also scratch built a set of traction bars for the rear. Quote Link to comment Share on other sites More sharing options...
Dragfreak Posted March 4, 2013 Share Posted March 4, 2013 Great job!! and i love that color!! Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 4, 2013 Author Share Posted March 4, 2013 Also going to add the strip on the back in white. Quote Link to comment Share on other sites More sharing options...
Christopher J Posted March 4, 2013 Share Posted March 4, 2013 Great looking build so far. I like the two tone interior. Looki.g forward to seeing more of the build. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 5, 2013 Author Share Posted March 5, 2013 Was not sure if the two tone interior would go with the Root Beer paint. Here are few pictures of the wheels & tires and the hood after being painted. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 6, 2013 Author Share Posted March 6, 2013 Clear coated the rims tonight & made mounting plates for the rear backing plates to axle housing & painted them. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 11, 2013 Author Share Posted March 11, 2013 (edited) Well have gotten it cleared and the strip on the rear & should have done some research on the rear strip because it's not far enough back on the trunk and as it goes down the sides it is slanted forward a bit. Edited March 11, 2013 by Metalmad Quote Link to comment Share on other sites More sharing options...
vintagedragfan Posted March 11, 2013 Share Posted March 11, 2013 awesome!! turning out great Quote Link to comment Share on other sites More sharing options...
wrecker388 Posted March 11, 2013 Share Posted March 11, 2013 Cool! That color is pretty similar to what is on my 1:1 Thunderbird. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 15, 2013 Author Share Posted March 15, 2013 Going to have to repaint ! Leaving the rubber band on overnight to get the ride height correct cut into the paint pretty bad. Learning something new everyday. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 17, 2013 Author Share Posted March 17, 2013 Picked up another Revell Hemi kit to use the body & hood for the repaint and will be changing the color also even though I liked the Rootbeer.Plus the 426 in this kit is done really well so I'll be using that for a future build. So hopefully I will be able to get this painted tomorrow since today i did the body clean up & scribed the door and trunk lines & primered the body today. Quote Link to comment Share on other sites More sharing options...
Dragfreak Posted March 17, 2013 Share Posted March 17, 2013 You can strip the old paint off the 1st body with castol super clean, you can find it at wal mart Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 17, 2013 Author Share Posted March 17, 2013 Yes I know but want to get this done plus i needed another 426 Hemi motor for a future project. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 18, 2013 Author Share Posted March 18, 2013 Got the Hemi Dart primed today and some of my next build which is a Lamborghini Aventador. Man I really like the Tamiya Primer that primer goes on really thin and smooth. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 24, 2013 Author Share Posted March 24, 2013 Well I finally got the 68 Hemi repainted today in Bronze it was Root Beer & the Root Beer just did not look right to me plus when I installed the rear decal strip I laid it down wrong and the rubber band I had wrapped around the front to hold on the frame so I could get the ride height right on the front cut into the paint really bad. Plus I worked on the Lamborghini Aventador Brake assembly's. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 24, 2013 Author Share Posted March 24, 2013 Got the Decals on last night & cleared the body and hood today so hopefully if everything goes right I can get the Dart assembled sometime this week. Quote Link to comment Share on other sites More sharing options...
MAGNUM4342 Posted March 24, 2013 Share Posted March 24, 2013 Love the color and the soft drink! IIRC, MOPAR made a series of street legal HEMI Darts labeled "Baby Grands". Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 27, 2013 Author Share Posted March 27, 2013 (edited) Here are some mock up photos. I still need to rub out the clear coat which I will do this weekend add the coolant hoses,brake lines,seat belts etc and get the stance done. Edited March 27, 2013 by Metalmad Quote Link to comment Share on other sites More sharing options...
Ridge Rider Posted March 27, 2013 Share Posted March 27, 2013 I liked both colors, too bad about the first one. I hope you post pics of the Lambo and fit and finish info when you get there. Quote Link to comment Share on other sites More sharing options...
JasonC Posted March 27, 2013 Share Posted March 27, 2013 Love the color and the soft drink! IIRC, MOPAR made a series of street legal HEMI Darts labeled "Baby Grands". You're thinking of the 1966 D/Stock Dart. It had a 273 with bigger carb,hotter cam, and a set of headers in them. They never made a Hemi Dart for the street. All LO23 Darts where sold as is and with no titles IIRC. Now you could get a 340 and 383 in the GTS in 68. Then in 69 you could get a 340 in the Swinger and 340, 383, and 440 in the GTS. But no Hemi's. But back to this model. I love the color! And the wheel choice! Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted March 27, 2013 Share Posted March 27, 2013 Love the color and the soft drink! IIRC, MOPAR made a series of street legal HEMI Darts labeled "Baby Grands". None of the 1968 LO23 Hemi Darts were never intended to be street legal. All were marketed for and to be used in 'Rapid Accelerations Speed Trials' When delivered to the customer , they did have something you 'might' call exhaust system, Wiper arms but no wiper motor , no mechanisims to operate the ft windows, no heater or defroster system. So I don't think they were considered street legal. And NO warrenty of any kind. I'm not familiar enough with the earlier 1966 D Stock Darts to comment on them one way or the other. But like mentioned, they were 273 cars and were a far cry from the Hemi Darts Quote Link to comment Share on other sites More sharing options...
jaydar Posted March 27, 2013 Share Posted March 27, 2013 Man, i really love the job on this car. Not hard to thrill me with a Mopar!! Great color. joe. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted March 31, 2013 Author Share Posted March 31, 2013 Well I have finished polishing out the body & hood today so maybe tomorrow afternoon or evening I can start final assembly. Quote Link to comment Share on other sites More sharing options...
Metalmad Posted April 3, 2013 Author Share Posted April 3, 2013 Got the bare metal foil on tonight. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.