cowboy rich Posted October 11, 2017 Share Posted October 11, 2017 For those who don't know I lost my father on 9/9 and with that happening I have ended up with a 1942 ford 9n tractor that mom wants to restore (That means me). It needs some body work and a couple of the dents look like it "stretched" the sheet metal, and I don't want to use extreme amounts of filler, so I'm looking for suggestions. The tractor does run but needs some work to the engine as well does anybody know a resource for that kind of stuff and I need to find a manual but I don't want to unnecessarily pay the price my local napa charges (real small town)ThanksRich Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted October 12, 2017 Share Posted October 12, 2017 (edited) Here's the easy part. Ebay has a 9N shop manual reprint for about $11 plus about $4 shipping. http://www.ebay.com/itm/Ford-Tractor-2N-8N-9N-Shop-Manual-I-T-Shop-Service-coil-binding-/263193789609?epid=2254445582&hash=item3d479284a9:g:TwwAAOSwyQtVj6qQ Ebay is also a great source for parts. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR2.TRC1.A0.H0.Xford+9n+tractor+parts.TRS0&_nkw=ford+9n+tractor+parts&_sacat=0 Now for the sheet metal. "Stretching" is usually identified by "oil-canning" after the dent is hammered out, though it's sometimes pretty obvious, as I assume it is in your case, when a panel has been struck with something like the round end of a a ball-pein hammer, or a bullet. After repairing the dent as much as possible with a hammer and dolly, sheet-metal can be shrunk in several ways. The one I favor most uses heat from an oxy-acetylene torch. This video will get you going in the right direction. Edited October 12, 2017 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
Longbox55 Posted October 12, 2017 Share Posted October 12, 2017 Fortunately, the N series Ford tractors are very easy to get parts for. Most parts are even still available from the dealers, which in this case would be any Case-IH-New Holland dealer (they bought out Ford/New Holland a few years ago). Farm supply stores, like Tractor Supply, are another good source for parts. Quote Link to comment Share on other sites More sharing options...
Dawson Posted October 12, 2017 Share Posted October 12, 2017 You might want to look into the- N-Newsletter Quote Link to comment Share on other sites More sharing options...
cowboy rich Posted October 12, 2017 Author Share Posted October 12, 2017 Thank guys I'm sure I'll have some more questions later! Quote Link to comment Share on other sites More sharing options...
Eshaver Posted October 12, 2017 Share Posted October 12, 2017 (edited) Rich, my cousin owns such a tractor . A lot of parts can be had on the 8N- 9N forum https://www.shopping.net/shopping?qsrc=999&qo=semQuery&ad=semD&o=600389&l=sem&a Edited October 12, 2017 by Eshaver ADD INFO Quote Link to comment Share on other sites More sharing options...
disabled modeler Posted October 12, 2017 Share Posted October 12, 2017 Im very sorry to hear about your loss Richard...you all have my thoughts and prayers. I once was a auto technician for many years...happy to help in any way I can. Quote Link to comment Share on other sites More sharing options...
Badluck 13 Posted October 12, 2017 Share Posted October 12, 2017 On my 9N I have had good luck with http://www.tractorpartsinc.com/ also http://www.9nford.com/ for help and info as well as the N-Newsletter as mentioned along with New Holland for mechanical parts.....I have been off and on restoring mine as well ....not saying I have all the know how or answers but I would be happy to help out in anyway that I can. Quote Link to comment Share on other sites More sharing options...
cowboy rich Posted October 13, 2017 Author Share Posted October 13, 2017 I really appreciate the help everyone, I'll look up more of the links for parts and guidance.I will have to watch the video a few more times Bill but that is the kind of thing I was thinking of.I will also check out the forums about the n-series tractors and I need to find the newsletter that was brought up.THANKS AGAINRICH Quote Link to comment Share on other sites More sharing options...
Mercuryman54 Posted October 16, 2017 Share Posted October 16, 2017 About 5 miles from my house there is a company that sells parts and restores N series Ford tractors.They have a website. The business is called N-complete. Dennis Quote Link to comment Share on other sites More sharing options...
dartman Posted October 21, 2017 Share Posted October 21, 2017 Look at Steiner tractor parts........ Quote Link to comment Share on other sites More sharing options...
cowboy rich Posted February 4, 2018 Author Share Posted February 4, 2018 (edited) Thanks again for all the good info, we are working on getting things ready to truly get started on this, weather is playing nice so time for the work to start. I'm going to have to add a few tools to the collection, one of which will be a gun to spray it with, so here comes the questions. What would be a decent paint gun, I will only use it a few times so, no need for high end equipment, just need it to do a good job a few times. I'm even open to something from a pawn shop or harbor freight if I know what will do the job. I've done some body work in the past but I'm NO WHERE NEAR A PROFESSIONAL, so the next question would be what's a good filler all I've used before has been Bondo. Thanks again Rich Edited February 4, 2018 by cowboy rich Stinking auto correct Quote Link to comment Share on other sites More sharing options...
Craig Irwin Posted February 5, 2018 Share Posted February 5, 2018 On 10/15/2017 at 9:53 PM, Mercuryman54 said: About 5 miles from my house there is a company that sells parts and restores N series Ford tractors. They have a website. The business is called N-complete. Dennis I was going to recommend them, we must be nearly neighbors! Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted February 5, 2018 Share Posted February 5, 2018 On 10/20/2017 at 11:57 PM, dartman said: Look at Steiner tractor parts........ I'll second that! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.