Billschneider64 Posted November 5, 2017 Share Posted November 5, 2017 I am working on a Buick Reatta promo with intent of creating a detailed curbside from it. I am struggling with getting the windshield out of the assembled body, as the way it's mounted with the "vent" windows lock it in place. Anybody ought there know how to get the glass out without cracking it? Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted November 5, 2017 Share Posted November 5, 2017 Bill, I have this very same promo and as I look at it, the only way to perhaps get the glass out is to very gently squeeze the vent windows, with maybe doing one side at first. I can't see any other way to take the glass out, and as you said there's the risk of cracking the glass, or damaging the A pillar. Unfortunately, the glass has been made to "lock" in place once installed as you mentioned. I guess the figured that once together, it wouldn't have a chance of the glass popping out, or crazies like us that want to take it apart and redo it! Hope this helps! Quote Link to comment Share on other sites More sharing options...
disabled modeler Posted November 5, 2017 Share Posted November 5, 2017 If its in good condition Id just re-polish her back up as it is but that is what id do..? Quote Link to comment Share on other sites More sharing options...
Billschneider64 Posted November 6, 2017 Author Share Posted November 6, 2017 I tried to flex the "vent" windows to no avail. The way they are adjoined to the windshield makes for a very strong joint. I am happy to report that I was able to cut one vent window to free up one side of the windshield, which enabled to remove it. I had to solve this problem, as I have accumulated several of these Reattas with intent of modeling a convertible and making a full detail with engine eventually. Thanks for the suggestion, Mr. Geary Quote Link to comment Share on other sites More sharing options...
Art Anderson Posted November 6, 2017 Share Posted November 6, 2017 Cool! I actually worked up the Reatta Convertible from this same promo, back around 1992-93. It was easy to do, frankly, but never did see a rubber mold, as I decided it would be too expensive for the resin kit market at that time.Art Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted November 16, 2017 Share Posted November 16, 2017 Wanna have fun? Try taking apart a Geo Storm promo. It's all together with heat fused parts you'll need to grind off... the clear shot is also the roof structure! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.