damodelguy phx az

great color combo joe, and attention to detail. very nicely done

very nice joe, cigar time, when a plan comes together and looks great to. now you can put it under finished if you havnt yet. as i realized i listed a finished in this grouping.

on your pic down view of front end, you look like you might be heavier on left and splash pan extends out further. bring it up cause ive been there to many times and it stink when it noticed after color goes on like a few of my projects. great job, and vision.

thank you guys.

thanx guys for the kind words

thank you guys

a friend sent me a pic of something similar, it had kaiser taillight, may have been made from a kiaser. i wasnt sure, and knew i couldnt get another kaiser for pieces so went with the caddy taillights. i had built my 51 traveler and a 53 manhatten already. thanx again all

thank you guys

thanx guys, i based it on a pic of a real one, but any more its hard to figure out what is the real look of som bodies.

this is my resin body built 58 edsel courier panel. used 57 ford del rio wagon as donor. built 10/10/25

thanx michael, yes i did post on scale auto, shame it went away

i agree on look of 39 plymouth over the 41, thanx guys i do like my 41s also thou🙂

my master build of my 53 ford custom fastback. used a built 53 ford parts kit and body, made bigger deck shelf was all. thanx

mark, i have seen a few manhattans customs. they have a different look stock with the high roof. but the customs have that roof flattened out and that lowered seems to make it look longer also. ya manhattan bodies are a lot harder to obtain. thanx guys

this is my master body recreated of 58 caddy eldorado lite custom coupe. roof has little different coupe look, sits on a 62 bel air parts box chassis and interior with modifications. thanx for droppin by, glen

this is my 51 henry j custom 2025. its a all cut up parts and pieces of 2 henry j s stretched and chopped, with caddy taillights. it sits on a 69 mustang mach l chassis and its interior, and a chevy motor. built 9/24/25 thanx for lookin in, glen oh called it 2025 cause i built the lime one back in custom 2013

built my created 39 ford standard custom coupe. used the interior from the amt 40 ford coupe kit to build this one. i used a testers 38 smoothster chassie i moved rear forward on it to fit tires into the wells. used the smoothsters motor, but needed to move it forward some. found a gas tank section in my parts drawer that fit great. still needed driveshaft when underside pic was taken. thanx for looking built 9/12/25

built my created 39 ford standard sedan. used the amt 39 40 ford sedan kit to build this one. had to cut to fit the front of amt sedans interior tube to fit with the fire wall i used when creating the standard sedan. was going to try and use testers 38 smoothster chassie i moved rear forward on to fit wells. but decided to use 39 40 because easier all around(except for alter front of tub and bottom of firewall. decided to put a wider rear tire and wheel from parts drawers) cut in each side of frame, then used each piece on opposite side and cut off extra now on outside. thanx for looking built 9/10/25

39 plymouth 3 window coupe 3d body i was given, thank you richard. i kitbashed with a amt wagon rod. worked really well, had a few tweeks here and there. used whole chassie but changed out tires and wheels and engine, used interior which i left open into the trunk area. thanx for lookin, built 9/8/25

my 41 buick sedan delivery was a bash of my resin 41 buick coupe and my resin 41 chevy sedan delivery. i seen a 46-8 chevy at grand nat show 3 or so years back. they took a car body and a sedan deli body and made panel fit the car body. mad for a more proportioned door on the panel. i had the buick and thought i try a buick instead, looks even more elegant i was thinking. the whole under body is a 41 ford woody i made up when i worked on the other 2 buicks. built 8/29/25 thanx for lookin, glen

48 ford convertible that has been shortened in quarter and had rear deck closed up to make it a single bench seat, with chopped conv roof. everything under the body is a parts car thunderbolt, framed shortened to fit wheels in wells. built 8/18/ 25 was a in and out of the box project.

this is a kit bash of my chopped version of my 41 chevy coupe with a 37 ford bed i believe. the entire chassis and engine is from the 39 wagon rod. interior tub was 50 chevy with a hump in floor and 59 chevy dash. 50 chevy was the back of the new cab also. i carried the side profile of the coupe through the rear widened fenders to the narrower 37 ford bed. i wanted to use the wagon rod with its wider rear tires also. i wanted a closed cab pickup like a pic of a orange real one i had saved. built 7/8/25 thanx

this is a kit bash of the chopped version of the 48 ford coupe and a 50 ford pickup kit. i wanted a closed cab pickup. i had to make the frame a little longer to line up the the wheels in wells. some tweeking to get it lower, and decided to use the 50 hood. built 7/1/25

nice creativity, lov to see it!

built my 57 buick panel wagon, used a 55 chevy nomad as donor kit. made interior tub and chassis 1/2 longer. when i went to finish up and put the chassis under the body, SURPRISE! ended up being alot of cutting on top of chassis plate to get the back down for an even stance. (top of tunnel and top of shock floor) it looked like some of our cars in the 70s with the rear ready to shooting off for space. i ended up putting heavy duty springs on front to bring my 73 comino up even with the (stock air shocks raised for my 60s) rear, i liked the just enough raise for tires and front up to even out. oh ya 57 buick, i decided slight wider tire all around black walls on this one. enjoy built 5/15/25 thanx glen damodelguy