outlaw427

Johan kit..painted lightning white over Tamiya silver leaf..Billy Gooche decal.

I'll have a few body up shots soon..Thanks for the comments.

Mpc Kit re-release subtle up-grade to the cage box stock with sum plumbing. Cheers...

It's the original Double kit...Sprinter and Indy car. I used different tires all around and pony'd the left front.. Added shrink tubbing to the roll bars as padding..and used a wide five rim on the right front. also cut through the engine cowling so that the scratch built velocity stacks show through.. No Velocity stacks provided with the kit.

Built a wing for this edmunds Super. It's painted Testors Lightning white.

Ok...the black wire you see is the spark plug wire leading into the head. I don't build very many bikes..so i don't use after market parts. Thanks for your inputs..

Haven't built a bike in a while..so i thought the Tamiya 1/12 was the way to fly..

Body from Freds resin and the Chassis and cage Scratch built..Here's what i got so far

Yes the trailer was a model with some Scratch built Add ons and some kit bashing to look like the trailer we still use today.

Sure tony..Here's a few more pictures...The Chassis and cage is Scratch built from Styrene plastic. Cheers..Lui

These 1/16 scale models have not been re-released in years...I've been buying them on E-bay. I've got a considerable collection of most of them.

Here's the AMT Mack Flat Nose Rig and AMT Tanker... Cheers..Lui.

Here's The AMT Frieghtliner Flat Nose...The Instruction Sheets on these Could Drive You Nuts..With a few good guesses you could get through it. Cheers...Lui

Here's were i'm at at this point with The Racer.. I use "Mig" Grease and Oil Mixture to highlight Chrome and give a used look. Cheers...Lui

Thanks for the comments... I used Tamiya Yellow and Blue For paint with some Clear over top.

Here's a rare one... Cheers..Lui.

Man that's Saterday night Alright...Awsum job buildin and d-tailin the hauler too.

Great Subject..Richard Petty. What about decals?..

I agree..Awsum Job and super clean.

Nice Labonte Ride.. I've built a few myself...They're sum of my favorite builds. Great job.

Nice Bruce.. I built this one a while back but not as Clean and neat as yours..Great job.

Wow...Thanks for the Compliments fellas. Just to answer a few of your questions. I don't have Plans on paper for this case but did build it from what i imagined i needed..and I used a round plexi tube In the middle and glued nine octagonal plexi plates to the tube and eight rectangle plexi shelves on each octagonal plates. Now that i got you dizzy... her's sum close-ups.. See...Round plexi tube in middle...Octagonal middle plate glued to tube and eight rectangle plexi shelves glued to octagonal middle. The two top shelves were melted and slanted downwards because they were at the 5 1/2 foot level. and the rest of the seven shelves were flat. The selves are exactly the same width of the models so that you can't see what's holdin them up. And...Staggered the shelves like a Christmas Tree so that the cars are not on top of each other so you can see them without the top shelf obstructing the bottom one... Hope this answers a few of your questions.. Cheers..Lui.

Slixx Decals were used to build this one.. This is Jason Leflers ride. Cheers..Lui.

There's more than 80 Nascar models Terry...Lets just say I need to build two more Cases to house all my Nascar builds. I usually build two or three at the same time.

Thanks for the comments.. This Camaro Super Latemodel was raced primarily at Flamboro Speedway and also Toured at many invitational races around Ontario..Sunset..Peterboro..Etc.