Jump to content
Model Cars Magazine Forum

JohnU

Members
  • Posts

    360
  • Joined

  • Last visited

Posts posted by JohnU

  1. I don't toss stuff nearly as much as I should as well! The eyeglass lenses got me thinking I do the same thing! Multiple old scripts filling a drawer! My rationale is that good money was spent and seems a waste to throw away! Even though they're unusable. Same with old computers and electronics, clothes, magazines....you get the picture. D.mn, I need to clean out my garage and basement!LOL!

  2. Section 3. Composition/information on ingredients

    Ingredient name

    % by weight

     

    Acetone
    Propane
    Butane
    Lt. Aliphatic Hydrocarbon Solvent Med. Aliphatic Hydrocarbon Solvent Toluene

    Methyl Ethyl Ketoxime

    32.86 15.66 15.04 11.16 7.7 0.3 0.14

     

    Any concentration shown as a range is to protect confidentiality or is due to batch variation.

    There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health and hence require reporting in this section. 

     

    Taken from the SDS on Kylon's web site.

  3. Got my MCM issue 201 and got excited when I saw the Down n Dirty article dirt bikes with the van. Very cool little bikes but I need to know how to get that side door on the van to slide open and closed. Got one in my stash I'm holding off on building till I can get this figured out. Any ideas? Thanks, figured if anyone would know it would have to be here!

  4. I built a down draft paint booth that uses the same filter as my furnace 1 x 16 x 25 inches. The working area above is about 20 - 25 inches and the front is slightly slanted so I can lay a piece of plexiglass over the front without it falling off. I mounted a ceramic light fixture to a small piece of wood that can easily be removed from my booth when I'm painting. To dry paint I use a 100 watt lightbulb. The fixture is mounted as high as I can get it in the booth on the back wall so it's not too close to my parts. Using an outdoor liquid thermometer inside the booth with the light and closed with the plexiglass, the temperature only gets to 97 degrees. To be sure, I tested the heated space with a junker body and it survived no melting after sitting over night. May have got lucky because it works great for drying enamal piant in about 2 to 3 days! But then, I use Donn Yosts paint method too!? Lately it been getting more difficult to get 100 watt bulbs may try 75's instead

  5. Just a heads up to anyone near the Northfield Village Ohio Goodwill outlet store.  I dropped off a few boxes of car kits totaling about 125 kits. Needed to clear the garage before the wife threw them out! LOL! It's ok, still have a huge stash! They range from 1930's classics to recent drag rails. Not sure when they will set them out for sale, since I donated them Saturday. Happy hunting!

  6. I'm only seeing a single small ad at the bottom of the page (don't even see em unless I scroll to the bottom of each page)  so far all the ads I've noticed are main-stream ads for cars, banks and the like.  Not a problem for me.

    Yea, I get these too. I don't visit adult sites so why these other ones show up seems odd! The ad banner has a feedback option that allows you to report the ad as repetitive, inappropriate, or irrelevant. Yet no matter if I tag it inappropriate it will still pop up the same ad in a different thread on this forum. Very annoying! Gonna try the ad blocker like Ace suggested and have my wife model some Victoria Secret for me while I'm at it.... Andy! :P

  7. I get that these ad banners generate revenue and aren't going anywhere anytime soon, but how do I keep these ads for Asian, Middle eastern or what ever girls dating sites from popping up?! I mark them as "inappropriate" yet they still show up! WTF! I don't get these ads anywhere else!

×
×
  • Create New...