Search the Community

I've been wanting to build a Jeep Gladiator pickup for a long time, so I bought Revell's most recent "Pink Poison" reissue of their '81 Jeep J-10 pickup and got started. I built this kit in the mid '80s and recalled most of its shortcoming and faults, but it's the only game in town for a bi-scale Jeep J-series truck. so off I go. First step, separate the one-piece(!) cab and bed along the vertical joint line between the two: Next, create a rear cab wall using styrene sheet and reference photos. The Full Size Jeep Forum has been a lifesaver for reference photos, so breaking the rear cab wall down into smaller pieces and different levels, I was able to come up with something close. Here's a good look at the earlier small window rear cab wall on a real truck: I did cheat a bit with the ribs/depressions, as the inside corners should have much smaller radii (essentially making each depression much more rectangular in shape), but I also knew very little of the lower two-thirds of the rear wall would be visible once everything was assembled, so it was a compromise I decided to accept in the name of progress. Anyway, here are the pic of my progress so far: Base piece, step one: Second piece layered on top, to add rib detail. The depressions with be filled slightly to soften/gradually taper the depressions: Greenhouse band/layer added: Same stage as above image, but you can see how the rear wall is just slightly inset from the cab's rear wall. This "step" will also get filled to soften the transition between the wall and cab in the greenhouse area: Tonight I added the raised section around the window glass, most of which will be removed when I create the window opening: