fatherdevine Posted March 15, 2008 Share Posted March 15, 2008 ok guys, so I am building a low rider with an intricate paint pattern. I know better but I did it anyway, now I need to know how to remove tape reside without messing up the paint I have applied thus far. Thanks for the help in advance. Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted March 15, 2008 Share Posted March 15, 2008 You might want to try a mild wax such as Novus or what I use to get rid of epoxy film----- Meguiar's Car Cleaner Wax. Is the paint fully cured? 'Cuz you don't want to do anything until the paint has fully dried. Another bit of advice: Tamiya Tape! It's the best stuff out there for masking! Quote Link to comment Share on other sites More sharing options...
Olle F Posted March 15, 2008 Share Posted March 15, 2008 Try some kind of cooking oil (Canola, olive oil etc). It works on a lot of the adhesives you find on tapes and stickers. I discovered this by mistake when I was cooking: There was a paper label on my new kitchen countertop, and I had tried a lot of different chemicals on it without success. Then I happened to leave a bottle of olive oil sitting right on the label overnight, and as bottles of olive oil tend to do, it left some olive oil on the countertop. The next day I was wiping the counter clean, and the label came right off. Quote Link to comment Share on other sites More sharing options...
ismaelg Posted March 15, 2008 Share Posted March 15, 2008 I have used BBQ lighter fluid with a cotton swab. I was scared to death to do it but it works like a charm! Even on windows. Of course, test in a small area first. Thanks, Quote Link to comment Share on other sites More sharing options...
fatherdevine Posted March 16, 2008 Author Share Posted March 16, 2008 Thanks gentlemen, I have some of the professional green masking tape, but I was being very frantic about trying a new (to me) paint technique making paint stencils out of plain index cards. I was designing the patterns of the index cards, then cutting them out and tracing them onto the tape. I would them apply the tape and paint. So far it is turning out pretty good except for the tape residue. Quote Link to comment Share on other sites More sharing options...
jamie Posted March 17, 2008 Share Posted March 17, 2008 Thanks gentlemen, I have some of the professional green masking tape, but I was being very frantic about trying a new (to me) paint technique making paint stencils out of plain index cards. I was designing the patterns of the index cards, then cutting them out and tracing them onto the tape. I would them apply the tape and paint. So far it is turning out pretty good except for the tape residue. I've also heard that WD40 works. I personally have nevber tried it, but hey...ya never know.... Quote Link to comment Share on other sites More sharing options...
bobss396 Posted March 18, 2008 Share Posted March 18, 2008 Get "Goo Gone". Any hardware aisle should have it and it works every time. Its a citrus based product so it will be safe for all finishes (so far for me). Dab it on, give it a few seconds, wipe it off and do a quick rinse and mild soap wash. Bob Quote Link to comment Share on other sites More sharing options...
fatherdevine Posted April 14, 2008 Author Share Posted April 14, 2008 This stuff works great, I found it at Lowes. The thing that makes it so good is that it is not harmful to skin so use can use it to remove paint from your hands. Quote Link to comment Share on other sites More sharing options...
evilone Posted April 14, 2008 Share Posted April 14, 2008 sucks doesnt it i hate it when i did it as fro removing the residue you should be able to polish it out with no problems Quote Link to comment Share on other sites More sharing options...
samdiego Posted April 15, 2008 Share Posted April 15, 2008 Try using more of the same tape. Stick some fresh stuff over the residue and peel it away slowly. A little warmth wouldn't hurt either. Quote Link to comment Share on other sites More sharing options...
billd64 Posted May 2, 2008 Share Posted May 2, 2008 ive used novice num 2 before and ive used rubbing alcohol pads that you can get from pharmacy or drs office, takes off tape residue and no damage to paint, also maybe warm water with DAWN DISH DETREGENT?? bill d. ok guys, so I am building a low rider with an intricate paint pattern. I know better but I did it anyway, now I need to know how to remove tape reside without messing up the paint I have applied thus far. Thanks for the help in advance. Quote Link to comment Share on other sites More sharing options...
Guest Gramps-xrds Posted May 3, 2008 Share Posted May 3, 2008 Thanks gentlemen, I have some of the professional green masking tape, but I was being very frantic about trying a new (to me) paint technique making paint stencils out of plain index cards. I was designing the patterns of the index cards, then cutting them out and tracing them onto the tape. I would them apply the tape and paint. So far it is turning out pretty good except for the tape residue. when I was lettering pulling trucks I often used contact paper for lettering stencils. It almost always left adheasive when I took it off. I used mineral spirits and baby powder to remove it. The baby powder keeps it from resticking. If it's fresh enamel try cooking oil and talc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.