Revell 58' Corvette Roadster

[hmhsbritannic12]

Hello, i've been attempting to build model cars for quite some time, but they usually don't turn out very well, due to poor fitting parts and bad instructions. and I hate to admit it, my own errors, such as accidentally getting cement all over the clear parts, and not waiting until everything is fully dried. This model, however, I think is coming out well so far. What do you guys think?

[Xingu]

I have learned to just take it slow and easy. Give things time to dry and you will be much happier with the results.

I really like these older Vettes. Looking forward to seeing how this one turns out.

[MrObsessive]

I echo what Michael says...........there's no rush to make models come out nice. They'll still be there when you've had enough for the day and can come back to 'em later.

A couple observations.....it looks like you've got a split in your steering wheel. I don't know what type of glue you're using, but some liquid cement applied (sparingly) with a tiny paint brush (for that purpose only) can help reattach that back together. After everything's dry, you can touch it up with whatever paint you were using. 

I also see that you're using a type of mini clip to hold your parts.

That can be OK as far as it goes, but I strongly suggest on a painted part such as your dash, you may want to use something other than a tight clip that can mar the surface-----especially if that particular grip has "teeth". You might want to try something I use called "Fun Tac" which is like a soft silly putty. I use this along with a plastic spoon to hold parts temporarily for painting.

This is a really good kit as it has lots of detail for this era 'Vette.........you shouldn't have much trouble getting 'er together!

[maltsr]

This is looking good so far Bradley :). As the others have said, just take your time.  Work on other parts of the model while waiting for paint to dry.  As for the glue on windshield problem, try using white glue for clear parts, it's water soluble and any excess can be removed with a damp cloth.

You'll learn a lot by following other builds on here and in the 'Tips and tutorials' section.

The main thing is to enjoy yourself.  I look forward to following your progress.

[hmhsbritannic12]

I echo what Michael says...........there's no rush to make models come out nice. They'll still be there when you've had enough for the day and can come back to 'em later.

A couple observations.....it looks like you've got a split in your steering wheel. I don't know what type of glue you're using, but some liquid cement applied (sparingly) with a tiny paint brush (for that purpose only) can help reattach that back together. After everything's dry, you can touch it up with whatever paint you were using. 

I also see that you're using a type of mini clip to hold your parts.

That can be OK as far as it goes, but I strongly suggest on a painted part such as your dash, you may want to use something other than a tight clip that can mar the surface-----especially if that particular grip has "teeth". You might want to try something I use called "Fun Tac" which is like a soft silly putty. I use this along with a plastic spoon to hold parts temporarily for painting.

This is a really good kit as it has lots of detail for this era 'Vette.........you shouldn't have much trouble getting 'er together!

I didn't even realize that the steering wheel had a split in it until now. I don't recall that happening when I was putting it into place.

[MrObsessive]

Yeah, they can be fragile pieces!

It's an easy fix though.........you can lightly press that back into place and at the same time flow some liquid cement (if you have it) into the break. The capillary action of the cement would help seal that, and then when thoroughly dry, touch up the whole works with paint.

[espo]

This is a fun kit and has lots of details, The only real problem areas to look for are the hinges for the trunk and hood. As others have mentioned just take your time. Also the exhaust crossover on front of the engine can interfere with the frame.