MonoPed Posted June 1, 2016 Share Posted June 1, 2016 The body shell on the Ford GT is molded in two parts, and glued together by the factory with what appears to be a liquid solvent cement. Clever way to get the shape, but makes it difficult to repaint. It's glued in four spots, but can be separated without destroying it. The first two spots are behind the front wheel arches. I just wedged a chisel blade under them and twisted til they popped loose. The roof took a little more work since it was glued near the top of both A pillars. I took the chisel blade out of the handle, and slipped it through the back window opening, under the header. I used a small hammer to tap the blade into the glue joins, working it across the joins til they popped loose. Went back in and sanded the glue marks smooth. This kept all the structure intact, and it fits back together nice and tight so the glass fits correctly. And now it'll be much easier to paint and polish. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted June 1, 2016 Share Posted June 1, 2016 Great tip. Thanks. I mocked one of these up on the bench to go vroom-vroom, but hadn't yet looked at it from the standpoint of actually building. This info you've posted is good to know in advance. Thanks again. Quote Link to comment Share on other sites More sharing options...
carsntrucks4you Posted June 3, 2016 Share Posted June 3, 2016 Great tip. I was Thing abut ow to repaint the are under the wings behind the door. Thanks Quote Link to comment Share on other sites More sharing options...
mcandela Posted June 10, 2016 Share Posted June 10, 2016 thanks for the tip!!!!!!!! Quote Link to comment Share on other sites More sharing options...
maltsr Posted June 10, 2016 Share Posted June 10, 2016 Thanks from me too, it's been sitting in my stash while I worried about painting it (I use spraycans, so this will help a lot) Quote Link to comment Share on other sites More sharing options...
Jhedir6 Posted June 14, 2016 Share Posted June 14, 2016 Nice tip Brian, thank you. Wish I had of tried it on my first GT, I repainted and it looks alright, but there is some roughness under the buttress'. I'm using this technique on my GTLM I just started. David Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.