Pledge Floor Care, odd behavior?

[aurfalien]

Hi,

I've been experimenting with Pledge Floor Care Finish x2 and noticed then when I brush it on with 1 stoke, a few seconds later tiny bumps start to show.

They are very tiny, like the size of sand or salt.

Seems really odd, hoping some one could shed light as to whats going on?

[JollySipper]

I have never used Future, so I may be way off base, but you didn't shake it up did you? I know regular polyurethane for wood can't be shaken or you'll get air bubbles in it......... kinda sounds like what you are experiencing......

[aurfalien]

I have never used Future, so I may be way off base, but you didn't shake it up did you? I know regular polyurethane for wood can't be shaken or you'll get air bubbles in it......... kinda sounds like what you are experiencing......

Thanks for the reply.

No shaky here.

My brush was sorta wet from another application so perhaps that's it.

I'll try a dry brush next time.

Edited November 4, 2016 by aurfalien

[935k3]

You probably got too much on the brush. Try applying with makeup remover pads(shown below) by dipping them in Future and then damp most of it off on a dry paper towel, then wipe it on in one direction. Do not press to hard or you get dry spots. You can get the 80 to a pack at the dollar store.

 

[aurfalien]

You probably got too much on the brush. Try applying with makeup remover pads(shown below) by dipping them in Future and then damp most of it off on a dry paper towel, then wipe it on in one direction. Do not press to hard or you get dry spots. You can get the 80 to a pack at the dollar store.

 

I think you are right about getting too much on my brush.

Thanks for the tips.

[Ace-Garageguy]

It's a floor wax!...NO!! It's a dessert topping!!!...

http://www.nbc.com/saturday-night-live/video/shimmer-floor-wax/n8625