1/25 scale tie downs

[cobraman]

Hi guys. I will be building an old Ford COE flatbed truck as a Shelby hauler. I want it to be hauling a Cobra and was wondering if anyone had an idea for making a reasonable looking set of tie downs. Thanks

[Kit Basher]

Stumbled on these the other day, I've never bought or used any. Kinda pricey, and maybe a chore to assemble, but maybe it will work for you.

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xphoto+etch+tie+down+straps.TRS0&_nkw=photo+etch+tie+down+straps&_sacat=0&_oac=1

[cobraman]

Thanks Hugh,  those would be perfect. I am afraid I would not be able to assemble them right. Looks like I will be making some the best I can with masking tape and some thin sheet plastic for latches.

[BigTallDad]

9 hours ago, cobraman said:

Thanks Hugh,  those would be perfect. I am afraid I would not be able to assemble them right. Looks like I will be making some the best I can with masking tape and some thin sheet plastic for latches.

Instead of thin sheet plastic, consider cutting up an empty aluminum beverage can or a disposable aluminum baking pan.. Use scissors, nail clippers, or an Xacto knife for cutting. You might want to practice/design using regular paper before you start cutting aluminum.

Be careful though; the cut edges can be sharp and may need some sanding.

Also, do not use your wife's sewing scissors to cut the aluminum, unless you enjoy sleeping on the couch.

Edited January 20, 2018 by BigTallDad

[SfanGoch]

Aber makes PE weld lines (Aber R-05) which can be used to simulate tie down straps.

[cobraman]

Thanks guys, I will consider those options.