rollinoldskoo Posted July 27, 2008 Posted July 27, 2008 makes me wanna put mine back on the bench use the stock fenders..... put those cool ones on a 55-65 chevy
MojaveRacer208 Posted July 27, 2008 Posted July 27, 2008 Thr Avanti looks great on the trailer Clay! As for wheels and tires, My personal choice would be a set of salt discs to fit the theme. I haven't heard of "Parts by Parks" lately, but his moon discs are the deal! For tires, maybe some of the relatively tall Monogram "GT Radials" (plain sidewalls on most of them) which were in most of their kits in the 80s and 90s. They would fill the wheelwells without being so wide you would need to tub the thing. And that brings me to the rear fenders...Since you seem to like the custom effect of the Chevy rear fenders, If you have no plans for the stock fenders, I have a Ford Off road truck which they would be appropriate on. Maybe I have some of those tires... The rear bumper would best be the drilled one, with a trailer hitch added. A wood push bar on the front made from a popsicle stick, with some weathering...would be my suggestion. Most lakes cars are geared so tall they need a push to get them rolling. Richard
Clay Posted July 27, 2008 Author Posted July 27, 2008 (edited) Clay, First, that Avanti looks GREAT sitting on that red trailer!! On to the business at hand; if the roll pan will work with the trailer hitch, that's the way I'd go. It fits better with the other custom parts you're using. For the wheels; unless you're going to tub the bed, you won't find too many wheels that'll fill those big openings and not be too wide. If you want, I'll send you a set of these: All four tires and wheels are the same size. The wheels measure out at about 23". With the tires mounted, they're as tall as the 23" Pegasus Chrome T's that I'm using on my truck, but they're only 0.350" wide. They fit up under the rear fenders without tubbing the bed. They also come with disc brakes for all four wheels. Let me know if you want them and I'll drop them in the mail. Yes, you'll have to to tub the bed to get the Pegasus 23" Chrome T's to fit...unless you narrow them... Later, I actually have a set of those wheels and tires. They came with Boyd Coddington's Corvette. Now how did you get those to stay there, or how would you get them to stay there. Thanks for the information though. I will try these and see how they do. Thanks for the reminder about the hitch, I dont think it would work for the rolling rear pan. makes me wanna put mine back on the bench use the stock fenders..... put those cool ones on a 55-65 chevy Or you could sent it to me Edited July 27, 2008 by jones_clayton
Clay Posted July 27, 2008 Author Posted July 27, 2008 Thr Avanti looks great on the trailer Clay! As for wheels and tires, My personal choice would be a set of salt discs to fit the theme. I haven't heard of "Parts by Parks" lately, but his moon discs are the deal! For tires, maybe some of the relatively tall Monogram "GT Radials" (plain sidewalls on most of them) which were in most of their kits in the 80s and 90s. They would fill the wheelwells without being so wide you would need to tub the thing. And that brings me to the rear fenders...Since you seem to like the custom effect of the Chevy rear fenders, If you have no plans for the stock fenders, I have a Ford Off road truck which they would be appropriate on. Maybe I have some of those tires... The rear bumper would best be the drilled one, with a trailer hitch added. A wood push bar on the front made from a popsicle stick, with some weathering...would be my suggestion. Most lakes cars are geared so tall they need a push to get them rolling. Richard Thanks!! I forgot about the trucks pushing the car. I have a grille gaurd from an old Chevy truck I could use. You wouldnt happen to have those moon discs would you? If not I can still send you those fenders, and the stock bumpers if you want them.
Clay Posted July 31, 2008 Author Posted July 31, 2008 Ok I did some work on the F100, not much though, got to wait on paint. Sinc I am not using the original engine in it, the driveshaft is too long. So you have a few choices, put the tranny from the kits engine on the engine you're using, find a different driveshaft, or make your own. And thats what I did!!!! Here's how Raul taught me how to do it. First thing first, you need to get the engine where you want it and measure, or eyeball the length you need. Cut the ends off the original d/s be sure to leavwe enough to stick in the ends of the tube. you may need to trim the ends to get them to fit. Do a test fit to make sure it fits. Then glue it and paint it the color you want then glue it in place if you are at that step. Comments welcome. Later,
Raul_Perez Posted July 31, 2008 Posted July 31, 2008 Looks right, Clay!! Actually, I thought that you needed a longer driveshaft, not a shorter one, or I would have advised you to cut the existing one to the length you need and pin it back together with a piece of brass rod. Either way, it looks good!! The side benefit of using the aluminum tubing, as you've seen, is that you also get a perfectly round driveshaft, unlike the one in the kit. Keep up the good work and the posts!! Later,
62SS Posted July 31, 2008 Posted July 31, 2008 Looks like its coming along good Clay. Thanks for the tip on the driveshaft. Keep up the good work. Ed
Clay Posted July 31, 2008 Author Posted July 31, 2008 Thanks guys, this was my second time making a drive shaft yesterday. I decided to make one for my 99 silverado yesterday. I'll show pictures when I post it.
Slim Louis Posted July 31, 2008 Posted July 31, 2008 This is a great kit, I gotta get me a couple before they are gone! This will be a cool team when you get it done, looking forward to the progress!
Clay Posted August 7, 2008 Author Posted August 7, 2008 Ok guys, I got the bed and trailer with a coat of paint. Too tired to deal with the hassle of posting pics but I will have some tomorrow. hope to have this on wrapped up by the end of next week.
Raul_Perez Posted August 8, 2008 Posted August 8, 2008 Oh yeah!! That old salt lickin' Avanti is going to look really good sitting on that matching trailer!! It "almost" makes me want to build another one, (but with all of the kits that I already have waiting for me to get to, probably not)!! Keep up the good work. I can hardly wait to see the Avanti on its trailer behind the matching hauler!! Later,
Slim Louis Posted August 9, 2008 Posted August 9, 2008 Looking real good there, Clay ! That Stude is cool, too, love the moon dics. Gonna be a fine looking race team, when your finished!
Clay Posted August 11, 2008 Author Posted August 11, 2008 Ok, just thought I would post some updates, sorry no pictures. I got the cab painted, not too happy with it but it will have to do for now, I need to save some of the paint for other things. I will get everything cleared tonight hopefully and get the trailer done. I still need to finish up the chassis. contenplating on putting the whole chassis from a lightning kit under it but I dont know yet. I would still love to get one of those resin Studebaker trucks off of eBay to tow it but, hey cant always get what you want. Anyway, I will post pics tomorrow evening. Take Care,
Clay Posted August 15, 2008 Author Posted August 15, 2008 From a few days ago, Italian Red, the cab isnt perfect but it will have to do. Been a rough week so this is all I have been able to do. Going to put a set of these on the truck as well.
Raul_Perez Posted August 15, 2008 Posted August 15, 2008 Looking good, Clay!! I can't wait ti see the entire build!! Later,
Clay Posted August 16, 2008 Author Posted August 16, 2008 Thanks Raul. i need to redo the hood hinge, it didnt like being taken apart to be painted. But, there is a good side, I can make the hinge longer like I wanted to do originally. Hopefully that will happen tonight or over the weekend.
george 53 Posted August 16, 2008 Posted August 16, 2008 It's lookin pretty good Clay. If you hadn't mentioned that the cab was primed an the bed wasn't, I wouldn't have noticed it. Isn't a whole lotta difference in the shades there. I do like the wheels too. Where'd ya get 8 of em?I mean you are runnin em on the truck too aintcha?Either way, it's lookin good kiddo!!! Great build!
Clay Posted August 16, 2008 Author Posted August 16, 2008 It's lookin pretty good Clay. If you hadn't mentioned that the cab was primed an the bed wasn't, I wouldn't have noticed it. Isn't a whole lotta difference in the shades there. I do like the wheels too. Where'd ya get 8 of em?I mean you are runnin em on the truck too aintcha?Either way, it's lookin good kiddo!!! Great build! I had one set, Raul sent me another with his care packages that he sends me every so often. Yeah I am gonna put on them both
plastikfreek Posted August 16, 2008 Posted August 16, 2008 Nice lookin' combo................. ..........Can't wait to see them finished.
JPRinc Posted August 17, 2008 Posted August 17, 2008 great looking combo there, cant wait to see more
Clay Posted August 17, 2008 Author Posted August 17, 2008 Did some surgery last night on the hinge. I carefully cut it out.... And replaced it with a new one. New Hinge Old Hinge I need to touch up the hood with some paint, I might paint the underside black.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now