Rider Posted April 23, 2019 Posted April 23, 2019 Hey all, I'm back into building again, been away for the past 9months or so due to life getting in the way and nullifying my mojo to build. As usual this site is always full of inspiration to keep building. As per what seems to be the normal model building MO most of us get a shot in the arm when new project idea hits us. Today the Jeep M-715 project build came across my fb feed and caught my eye as something I would like to try and replicate as close as possible. Not wanting to buy yet another new kit I went searching on evil bay and was lucky to find the old release of the Jeep Honcho for $15. A quick google search has revealed a ton of photo's. This project should hit the bench in a few weeks.
gotnitro? Posted April 23, 2019 Posted April 23, 2019 Now that's a truck I'd drive ..screw these cookie cutter euro SUV types clogging up the highway
Rider Posted April 30, 2019 Author Posted April 30, 2019 This build is on hold until I can get a couple others off the bench. When I do get around to it this will be the kit issue I will be using. I kinda feel bad about the prospect of chopping it up, it appears to be hard to find. I wasn't even looking and found it on evil bay cheap, $15cdn, even with postage it was cheaper then a new one.
Goose1957 Posted April 30, 2019 Posted April 30, 2019 You're in luck. Revell reissued this kit about a year ago and is easy to find. My local Hobby Lobby has them on the shelf. If you want to replicate the Jeep Truck in your photos, the front grill and headlight panel is made in resin from RMR to back date the kit to look like the old Jeep Gladiator. I just picked one up from them at the NNL East show last Saturday. Good luck, I'll be following this project with interest. Jeff
stavanzer Posted April 30, 2019 Posted April 30, 2019 Man, I need that RMR Grille. I just have to contact RMR resin and try to get one.
Rider Posted April 30, 2019 Author Posted April 30, 2019 1 hour ago, Goose1957 said: You're in luck. Revell reissued this kit about a year ago and is easy to find. My local Hobby Lobby has them on the shelf. If you want to replicate the Jeep Truck in your photos, the front grill and headlight panel is made in resin from RMR to back date the kit to look like the old Jeep Gladiator. I just picked one up from them at the NNL East show last Saturday. Good luck, I'll be following this project with interest. Jeff Yes I'm aware of the newer reissue with the sled, just didn't want to spend the money on a new kit. Like most of us, I don't need anymore kits, but this idea is just to different to ignore. Interesting looking grill, looks like it could use some clean up. I have a design idea for the grill of my own, I'll use the kit grill as a pattern. Thanks for posting that bit of information.
Ron Hamilton Posted May 1, 2019 Posted May 1, 2019 Now that's an idea. I bought a Jeep Honcho kit last year. I really want to make a Gladiator out of it. Hmmmm. It shouldn't be too hard.
Goose1957 Posted May 1, 2019 Posted May 1, 2019 No problem, sorry, wasn't sure if you knew about the repop. Cant wait to see where you go with this, thanks. Jeff
Rider Posted May 1, 2019 Author Posted May 1, 2019 1 hour ago, Goose1957 said: No problem, sorry, wasn't sure if you knew about the repop. Cant wait to see where you go with this, thanks. Jeff All good bro, it's hard to keep up sometimes with all the new re-issues going on. 1 hour ago, Ron Hamilton said: Now that's an idea. I bought a Jeep Honcho kit last year. I really want to make a Gladiator out of it. Hmmmm. It shouldn't be too hard. Ron, looks like you'd need a TJ kit as well. The actual Gladiator would be a jeep kit with some stretching and a box. I'd like to see you build that. The grey jeep is the concept.
Chariots of Fire Posted May 1, 2019 Posted May 1, 2019 I have measurements on the M-715 body and cab. Took them from an actual rig that was converted to make a brush truck. This was the result.
Ron Hamilton Posted May 1, 2019 Posted May 1, 2019 2 hours ago, Rider said: All good bro, it's hard to keep up sometimes with all the new re-issues going on. Ron, looks like you'd need a TJ kit as well. The actual Gladiator would be a jeep kit with some stretching and a box. I'd like to see you build that. The grey jeep is the concept. Uh, no. I want to do the Jeep Gladiator from the 60's. Same basic truck as the Revell Jeep Honcho kit.
dino246gt Posted May 4, 2019 Posted May 4, 2019 I prefer that older front style, that RMR resin looks a bit rough, I wonder if there's another source for the conversion???
Rodrigo Maia Posted May 28, 2019 Posted May 28, 2019 (edited) I'll follow your project closely. I had this same idea a few years ago and started doing mine using as a Jeep CJ-7 but I want to make the 715 Nukizer My project has been stopped for a long time, but below some photos. Seeing your work may inspire me to continue mine. Edited May 28, 2019 by Rodrigo Maia
Goose1957 Posted May 28, 2019 Posted May 28, 2019 You could always build this. I saw it at the PA Jeeps show in York, PA last year. Jeff
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now